Panasonic KXMB2030BL Guía De Operación
Feature/Code
Selection
Setting the toner
maintenance time
MBNM1NM5NM8N
maintenance time
MBNM1NM5NM8N
The unit will automatically activate for maintenance, once every 24 hours.
Because this is to prevent the toner from solidifying, the noise that the unit
makes during maintenance cannot be stopped. However, if the unit’s noise
bothers you, you can change the start time.
1. MMenuN A MBNM1NM5NM8N A MSetN
2. Enter the maintenance start time.
Because this is to prevent the toner from solidifying, the noise that the unit
makes during maintenance cannot be stopped. However, if the unit’s noise
bothers you, you can change the start time.
1. MMenuN A MBNM1NM5NM8N A MSetN
2. Enter the maintenance start time.
R The default time is “12:00”.
R If you selected 12-hour time entry (page 21), press MHN repeatedly to
R If you selected 12-hour time entry (page 21), press MHN repeatedly to
select AM or PM.
24-hour time entry.
3. MSetN A MMenuN
Resetting all features (and
deleting all data in memory)
MBNM1NM5NM9N
deleting all data in memory)
MBNM1NM5NM9N
Before you dispose of, transfer or return the product, activate this feature to
reset all programmable features and to delete all data stored in memory.
KX-MB2030 only: Phonebook (or caller information) and fax transmission data
(journal report and faxes received in memory) will be deleted.
M0N “NO” (default)
M1N “YES”
R Disconnect the telephone line cord (KX-MB2030 only), USB cable and LAN
reset all programmable features and to delete all data stored in memory.
KX-MB2030 only: Phonebook (or caller information) and fax transmission data
(journal report and faxes received in memory) will be deleted.
M0N “NO” (default)
M1N “YES”
R Disconnect the telephone line cord (KX-MB2030 only), USB cable and LAN
cable before activating this feature.
To reset all features:
1. MMenuN A MBNM1NM5NM9N
2. Press M1N to select “YES”. A MSetN
3. Press M1N to select “YES”. A MSetN
1. MMenuN A MBNM1NM5NM9N
2. Press M1N to select “YES”. A MSetN
3. Press M1N to select “YES”. A MSetN
Setting the ringer pattern
MBNM1NM6NM1N
(KX-MB2030 only)
MBNM1NM6NM1N
(KX-MB2030 only)
M1N “A” (default)
M2N “B”
M3N “C”
M2N “B”
M3N “C”
Setting the beep sounds and
keytones
MBNM1NM6NM5N
keytones
MBNM1NM6NM5N
M0N “OFF”: Deactivate this feature.
M1N “ON” (default): You will hear confirmation/error beep sounds and keytones.
M1N “ON” (default): You will hear confirmation/error beep sounds and keytones.
Note:
R Even if this feature is set to “OFF”, the unit beeps in the following cases:
R Even if this feature is set to “OFF”, the unit beeps in the following cases:
– the memory reception alert setting (feature #437 on page 62) is
activated (KX-MB2030 only).
– the top cover is opened.
Changing the ring count in
FAX ONLY mode
MBNM2NM1NM0N
(KX-MB2030 only)
FAX ONLY mode
MBNM2NM1NM0N
(KX-MB2030 only)
M1N “1”
M2N “2” (default)
M3N “3”
M4N “4”
M5N “5”
M6N “6”
M7N “7”
M8N “8”
M9N “9”
M2N “2” (default)
M3N “3”
M4N “4”
M5N “5”
M6N “6”
M7N “7”
M8N “8”
M9N “9”
Note:
R If you are using the unit with an answering machine, set to more than 4
R If you are using the unit with an answering machine, set to more than 4
Setting the Caller ID list to
print automatically
MBNM2NM1NM6N
(KX-MB2030 only)
print automatically
MBNM2NM1NM6N
(KX-MB2030 only)
M0N “OFF” (default): The unit will not print the Caller ID list, but will keep records
of the information for the last 30 callers.
M1N “ON”: The unit will print the Caller ID list automatically after every 30 new
calls (page 53).
of the information for the last 30 callers.
M1N “ON”: The unit will print the Caller ID list automatically after every 30 new
calls (page 53).
57
8. Programmable Features