Panasonic kx-td816ne Manual De Usuario

21

Allows you to assign a Flexible (CO, DSS) button as the Phantom button.

— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].

1. Press the desired Flexible (CO, DSS) button which you wish to

assign as the Phantom button.

2. Dial 88.

• The display shows:

3. Dial the phantom extension number.

• The display shows:

(— xxxx: phantom extension 

number)

• To erase an incorrect entry, press the CLR (S2) button or the

TRANSFER (CLEAR) button.

(The TRANSFER (

) button becomes the CLEAR button while in the

programming mode.)

4. Press the STORE button.

• The STORE indicator light turns on.

• The display shows the initial programming mode.

— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.

• The phantom extension number must be assigned in program [130] “Phantom Extension

Number Assignment” before assigning the Phantom button.

• A DSS button can be assigned as the Phantom button so that the operator can use it for

transferring a call.

• If you assigned the Phantom button to one of the CO buttons (13 through 24) on your KX-

T7230 telephone and change the telephone to a KX-T7235 model, you must re-program
the setting as the KX-T7235 telephone has only 12 CO buttons.  If you do not change the
setting, the phantom extension call reaches the INTERCOM button.

• System Programming — Added and Changed Features for Installation Manual

[130] Phantom Extension Number Assignment

1

2

EXT-

CLR

3

Phantom extension number

EXT-xxxx

CLR

4

or