Panasonic KXTG7170FX Guía De Operación
Preparation
11
Battery strength
Panasonic Ni-MH battery performance
(included batteries)
(included batteries)
Note:
L
It is normal for batteries not to reach full
capacity at the initial charge. Maximum
battery performance is reached after a few
complete cycles of charge/discharge
(use).
capacity at the initial charge. Maximum
battery performance is reached after a few
complete cycles of charge/discharge
(use).
L
Actual battery performance depends on a
combination of how often the handset is in
use and how often it is not in use
(standby).
combination of how often the handset is in
use and how often it is not in use
(standby).
L
Battery operating time may be shortened
over time depending on usage conditions
and ambient temperature.
over time depending on usage conditions
and ambient temperature.
L
Even after the handset is fully charged,
the handset can be left on the base unit
without any ill effect on the batteries.
the handset can be left on the base unit
without any ill effect on the batteries.
L
The battery strength may not be displayed
correctly after you replace the batteries. In
this case, place the handset on the base
unit and charge for at least 7 hours.
correctly after you replace the batteries. In
this case, place the handset on the base
unit and charge for at least 7 hours.
Turning the power on/off
Power on
Press {ih} for about 1 second.
Power off
Press {ih} for about 2 seconds.
Symbols used in these
operating instructions
operating instructions
Display language
17 display languages are available.
1
{ih}
i {j/OK}
2
Press {^} or {V} to select “Handset
Setup”. i {>}
Setup”. i {>}
3
Press {^} or {V} to select “Display
Setup”. i {>}
Setup”. i {>}
4
Press {^} or {V} to select “Select
Language”. i {>}
Language”. i {>}
Battery icon
Battery strength
5
High
6
Medium
7
Low
When flashing: Needs
to be charged.
When flashing: Needs
to be charged.
Operation
Operating time
In continuous use
KX-TG7150:
12 hours max.
KX-TG7170:
10 hours max.
12 hours max.
KX-TG7170:
10 hours max.
In continuous
standby mode
standby mode
150 hours max.
Symbol
Meaning
{j
/OK} Press {j/OK}.
i
Proceed to the next operation.
“ ”
Select the words in quotations
shown on the display (e.g.,
“Handset Setup”) by
pressing {^} or {V}.
shown on the display (e.g.,
“Handset Setup”) by
pressing {^} or {V}.
You can select
You can select “Deutsch
Deutsch”, , “English
English”, ,
“Türk
rkçe”, , “Magyar
Magyar”, , “Polski
Polski”,
“slovensky
slovensky”, “ČeŠtina
tina”, , “Hrvatski
Hrvatski”, ,
“Slovenscina
Slovenscina”, , “Eesti
Eesti”,
“LIETUVI
LIETUVIŠKAI
KAI”, , “Latvie
LatvieŠu”, ,
“Rom
Românã”, , “БЪЛГАРСКИ
БЪЛГАРСКИ”, , “Srpski
Srpski”,
“МАКЕДОНСКИ
МАКЕДОНСКИ”, or
, or “Shqiptar
Shqiptar”.
TG7150-7170FX(e).book Page 11 Wednesday, January 10, 2007 3:32 PM