Panasonic DPMB311EU Guía De Operación
Feature
Code
Selection
Job end
notification
notification
#174
To set the unit to alert you with a beeping sound after a print job is finished.
M0N “OFF” (default)
M1N “ON”
M0N “OFF” (default)
M1N “ON”
Note:
R This setting is valid for the following:
R This setting is valid for the following:
– PC printing
– Automatic report/list printing during fax transmission
– Printing received faxes
– Automatic report/list printing during fax transmission
– Printing received faxes
R When a printing error occurs, the unit will beep the error beep instead of this
beep, even if this feature is set to “ON”.
FAX ring count
#210
To change the ring count in FAX ONLY mode.
M1N “1”
M2N “2” (default)
M3N “3”
M4N “4”
M5N “5”
M6N “6”
M7N “7”
M8N “8”
M9N “9”
M1N “1”
M2N “2” (default)
M3N “3”
M4N “4”
M5N “5”
M6N “6”
M7N “7”
M8N “8”
M9N “9”
Note:
R If you are using the unit with an answering machine, set to more than 4
R If you are using the unit with an answering machine, set to more than 4
R The selection may vary depending on the location setting (feature #114 on
R If you change the location setting (feature #114 on page 67), the fax ring count
will be reset to “2”. If necessary, select the desired ring count again.
All address book
erase
erase
#289
To erase all items stored in the address book.
R Disconnect the following cables before activating this feature.
R Disconnect the following cables before activating this feature.
– Telephone line cord
– USB cable
– LAN cable
– USB cable
– LAN cable
M0N “NO” (default)
M1N “YES”
To erase all items:
1. MtN A MBNM2NM8NM9N
2. M1N A “YES” A MOKN
3. M1N A “YES” A MOKN A MtN
M1N “YES”
To erase all items:
1. MtN A MBNM2NM8NM9N
2. M1N A “YES” A MOKN
3. M1N A “YES” A MOKN A MtN
70
10. Programmable Features