Panasonic KXTG9582 Guía De Operación
– 2 –
N
To connect to 2 single-line telephone jacks
1
For Line 1: Connect the “Transparent” plug
telephone line cord (2-wire cord) (
telephone line cord (2-wire cord) (
1) to the unit,
then to the Line 1 single-line telephone jack (RJ11C)
(
(
2) until you hear a click.
2
For Line 2: Connect the “GREEN” plug telephone
line cord (4-wire cord) (
line cord (4-wire cord) (
3) to the unit, then to the
Line 2 single-line telephone jack (RJ11C) (
4) until
you hear a click.
Handset battery installation/Handset battery charging
Charge for about 7 hours.
Note:
L
L
USE ONLY rechargeable Ni-MH batteries AAA (R03) size (
1).
L
Do NOT use Alkaline/Manganese/Ni-Cd batteries.
L
Confirm correct polarities (S, T).
L
Follow the directions on the display to set up the unit.
L
Confirm “Charging” is displayed (
2).
Using the unit as a single-line telephone only
1
Connect the “Transparent” plug telephone line cord (2-wire
cord) to LINE 1/2.
cord) to LINE 1/2.
Handset/Base unit:
L
L
To use line 1 only: {MENU}(25) s {r}: “Line1” s
{
{
SAVE} s {OFF}/{EXIT}
L
To erase the message “Check tel line2”:
{
{
MENU}(19)
Connecting the telephone line cord
3
2
1
2
4
1
“Transparent” plug
“GREEN”
plug
If you subscribe to a DSL/ADSL service, attach a DSL/ADSL filter to the telephone line between the base
unit and the telephone line jack. Refer to the operating instructions for connections.
unit and the telephone line jack. Refer to the operating instructions for connections.
1
2
1
TG958x_(en)_QG.fm Page 2 Thursday, July 3, 2014 3:38 PM