Panasonic KX-TG5471 Guía De Operación
Useful Info
rmation
Answering
System
Preparatio
n
55
Special Features
For assistance, please call: 1-800-211-PANA(7262)
T
e
lephone System
Re-registering the Handset
If “No link to base. Move closer to base and try again.” is
displayed even when using the handset near the base unit, the handset may have
lost communication with the base unit. You need to re-register the handset to that
base unit.
displayed even when using the handset near the base unit, the handset may have
lost communication with the base unit. You need to re-register the handset to that
base unit.
Make sure the base unit is not being used. Have both the handset and base
unit nearby during registration.
unit nearby during registration.
• You can stop registration by pressing [OFF] on the handset and pressing
[LOCATOR/INTERCOM/TRANSFER] on the base unit.
1
Handset: Press [MENU].
2
Handset:
Scroll to
Scroll to
“
Initial setting
”
by pressing
[d] or [B]
, t
hen press the soft key
(
).
3
Handset:
Scroll to “Registration” by pressing [d]
Scroll to “Registration” by pressing [d]
or [B]
,
then press the soft key (
).
4
Base unit:
Press and hold [LOCATOR/INTERCOM/TRANSFER] for 3 seconds.
Press and hold [LOCATOR/INTERCOM/TRANSFER] for 3 seconds.
• The CHARGE indicator flashes. After the CHARGE indicator starts flashing,
the rest of the procedure must be completed within 1 minute.
5
Handset:
(1) Press the soft key (
(1) Press the soft key (
).
(2) Wait until a long beep sounds and the
display shows the following.
• Registration is complete.
Important:
Do not register other handsets to this base unit. Only the included handset can
operate properly with the KX-TG5471 base unit.
operate properly with the KX-TG5471 base unit.
Handset & Base Unit
SELECT
Initial setting
SELECT
Registration
O K
Press LOCATOR
on base unit
for 3 sec.
Then press OK
BOX 1
BOX 2
O K
SPIPRIVACY
1
Handset [1]
Registered
IN USE
[2]
TG5471.fm Page 55 Monday, December 20, 2004 5:21 PM