Panasonic TX-P50UT30B Guía De Operación

 Automatically compensates the picture frame rate and removes 

juddering movements to make the images smooth [Off] / [Mid] / [Max]

• 

 Depending on the contents, images may be noisy. To prevent the 

noise, change the setting.

• 

 This function is not available for selection (default to [Off]) when 

[Viewing Mode] is set to [Game] or in the mode of VIERA Connect.

 Automatically compensates the picture frame rate to make the 24p 

source movie images smooth [Off] / [Mid] / [Max]

• 

 This is available only for 24p signal input and displayed instead of 

[Intelligent Frame Creation].

• 

 This function is not available for selection (default to [Off]) when 

[Viewing Mode] is set to [Game] or in the mode of VIERA Connect.

 Improves vertical resolution for movie images [Off] / [On]

• 

 This function is available for the interlaced signal (except when 

[Viewing Mode] is set to [Game]).

 Reduces juddering and flicker noises of the 3D images [Auto] / [100Hz]

• 

 If the room is lit by fluorescent lights / dimmers (50 Hz) and light 

appears to flicker when using the 3D Eyewear, set to [100Hz].

 Enhances the picture resolution to make the image sharper [Off] / [Mid] / [Max]

• 

 This function is available for SD (Standard definition) signal.

• 

 As for HD (High definition) signal, this function is available when 

aspect mode is set to [16:9] ([16:9 Overscan] is set to [On]) or [Zoom].

• 

 Not valid on Media Player and VIERA Connect

 Increases the brightness of the side panel [Off] / [Low] / [Mid] / [High]

• 

 The recommended setting is [High] to prevent panel “image retention”.

 Selects the screen area displaying the image [Off] / [On]

 [On] : Enlarges the image to hide the edge of the image.

 [Off] : Displays the image in the original size.

• 

 Set to [On] if noise is generated on the edge of the screen.

• 

 This function is available when aspect is set to [Auto] (16:9 signal only) or [16:9].

• 

 This function can be memorized separately for SD (Standard 

definition) and HD (High definition) signals.

• 

 Not valid on VIERA Connect

 Changes the black level in the image for HDMI input mode with DVI 

input signal manually [Normal] / [Full]

• 

 When the DVI input signal from the external equipment, especially from PC, 

is displayed, the black level may not be suitable. In this case, select [Full].

• 

 The black level for HDMI input signal will be adjusted automatically.

• 

 For HDMI input mode with DVI input signal only

 Selects the mode for wobbling of the image to prevent panel “image retention” [Auto] / [On]

 [Auto] :  Automatically works only for the appropriate images and you 

rarely recognise the wobbling.

 Displays scrolling bar pattern to assist elimination of panel “image retention”

• 

 Press the OK button to start scrolling and press any buttons (except 

Standby) to exit this mode.

• 

 Display for at least 15 minutes for positive effect.

 Press the OK button to reset the present Picture Viewing Mode to the default settings

 Selects the basic sound mode [Music] / [Speech] / [User]

• 

 The selected mode affects all input signals.

 [Music] : Improves sound quality for watching music videos, etc.

 [Speech] : Improves sound quality for watching news, drama, etc.

• 

 In Music and Speech modes, you can adjust [Bass] and [Treble] 

settings, and those settings will be stored for each mode.

 [User] :  Adjusts the sounds manually by using the equaliser to suit your 

favourite sound quality.

• 

 For the User mode, [Equaliser] will appear on the Sound Menu 

instead of [Bass] and [Treble]. Select the [Equaliser] and adjust the 

frequency.   [Equaliser] (p. 38)

 Increases or decreases level to enhance or minimise lower, deeper sound output

 Increases or decreases level to enhance or minimise sharper, higher sound output