Panasonic RX-ES29 Guía De Operación
11
RQT7912
ALL-REC
[CD-DA]
Records the whole CD or selected tracks. When the tape
finishes before CD, recording and CD pauses for you to resume
recording on the opposite side.
finishes before CD, recording and CD pauses for you to resume
recording on the opposite side.
[1] Press [
∫ TAPE/CD] to switch to CD mode.
[2] Press [CD REC MODE] to display “ALL-REC”.
Each time you press the button:
The display shows the tape length needed.
“C – – – –” indicates the tape needed exceeds 100 minutes.
You can still record, but some tracks may not be recorded if
the tape is not long enough.
“C – – – –” indicates the tape needed exceeds 100 minutes.
You can still record, but some tracks may not be recorded if
the tape is not long enough.
[3] Press [
< DECK] to open the deck and load a
cassette with the side for recording facing up.
[4] Press [
¥/;] to start recording.
The unit rewinds the tape, records 10 seconds of silence,
and then starts recording.
and then starts recording.
To stop recording, press [
∫ TAPE/CD]. The CD also stops.
If a track is interrupted at the end of the side facing up,
Recording and CD pauses.
Recording and CD pauses.
* The unit records 10 seconds of silence, and resumes
recording from the beginning of the cut-off track.
Note:
≥
Random play and repeat play cannot be used with
“ALL-REC”.
“ALL-REC”.
1-REC
[CD-DA]
[MP3]
Records a selected track from the CD and stops.
Preparation:
Wind on the tape to where you want to start recording.
Wind on the tape to where you want to start recording.
[1] Press [
∫ TAPE/CD] to switch to CD mode.
[2] Press [CD REC MODE] to display “1-REC”.
[3] Turn [TIME/PRESET TUNE
[3] Turn [TIME/PRESET TUNE
TRACK SKIP
] to
select the track you want to record.
[4] Press [
¥/;] to start recording.
CD play and recording start at the same time.
Note:
≥
Recording and CD will stop when the tape reaches its end,
even if the track has not finished.
even if the track has not finished.
Recording the Radio
Preparation:
To record from the beginning of the tape;
Wind on the leader tape.
To record from part or half way through the tape;
Wind on the tape to where you want to start recording.
To record from the beginning of the tape;
Wind on the leader tape.
To record from part or half way through the tape;
Wind on the tape to where you want to start recording.
[1] Load a cassette with the side for recording
facing up.
[2] Tune to the station.
[3] Press [
[3] Press [
¥/;] to start recording.
To reduce noise when recording AM (Beat Proof function)
Remote control only
1 Press [PLAY MODE] while recording.
Each time you press the button:
bP1
,-. bP2
Choose the setting with the least noise.
To
Operations
stop recording
Press [
∫ TAPE/CD].
pause recording
Press [
¥/;].
continue recording
from another CD on
the same cassette
from another CD on
the same cassette
1 Press [
< CD] and replace
the CD.
2 Press [
¥/;].
Press again to resume
recording.
recording.
record selected tracks
1 Do step
[1] and [2], then
program the tracks. (
l 9)
2 Press [
¥/;].
skip unwanted tracks
1 Press [
¥/;] to pause
recording. (The CD also
pauses.)
pauses.)
2 Turn [TIME/PRESET TUNE
TRACK SKIP
] so the
next track you want to record is
displayed.
displayed.
3 Press [
¥/;] to resume
recording.
To
Operations
record the track again
on the opposite side
on the opposite side
1 Press [
< DECK], flip the
cassette, and insert it.
2 Press [
¥/;]*.
ALL-REC
1-REC
OFF
#
#
]
n
=====
]
n ,
=====
To
Operations
stop recording
Press [
∫ TAPE/CD].
(The CD also stops.)
continue recording
from another CD
from another CD
1 Press [
< CD] and replace the
CD.
2 Do steps
[3] and [4].
record a track in play
1 Press [CD REC MODE] to
display “1-REC”.
2 Press [
¥/;].
Recording starts from the
beginning of the track and stops
when the track finishes.
beginning of the track and stops
when the track finishes.
To
Operations
stop recording
Press [
∫ TAPE/CD].
pause recording
Press [
¥/;].
Press again to resume recording.
RX-ES29_EB.book 11 ページ 2005年3月23日 水曜日 午後4時27分