Panasonic dmre60 Manual De Instrucciónes

[RAM] [DVD-R]

Preparation
Switch [DVD, TV] 

(19) to “DVD”.

Í] (1) to turn the unit on.

<, OPEN/CLOSE] (42) to open the tray and 

≥Insert one disc only within the tray’s guides.
≥Press [<, OPEN/CLOSE] (42) to close the tray.

e.g.: DVD-RAM
(1) Arrow pointing inwards.
(2) Align correctly.
≥Insert label-up with the arrow 

facing in. (with double-sided 
discs, load so the label for the 
side you want to record is 
facing up.)

W, X, CH] (23) or numeric buttons (4) to 

(33) to select the recording 

≥Select “XP”, “SP”, “LP” or “EP”.

¥, REC] (31) to start recording.

≥The programme which has already been recorded is not 

overwritten.

To ensure recording
≥Use a disc that can be recorded on and that has enough space 

available.

≥Ensure the write protect tab is not set to “PROTECT”. (page 70)≥Ensure the disc is not write-protected with DISC INFORMATION 

(page 32).

ªTo pause recording

Press [

;] (8).

Press again to restart recording.

ªTo stop recording

Press [

∫] (7).

ªRe-inserting double-sided discs

You can get up to 12 hours recording when you use double-sided 
discs and use the “EP” mode.

ªRecording modes and approximate recording times 

≥You can play DVD-R on compatible DVD players by finalizing 

them on this unit, effectively making them into DVD-Video.

≥The video is recorded in a 4:3 aspect irrespective of the video 

signal input.

≥When recording bilingual channel sound onto DVD-R, it is 

possible to select only one of “M1” or “M2”.

When recording bilingual TV broadcast while receiving a 
bilingual TV broadcast
Select “M1”(main) or “M2”(secondary audio) of “Bilingual Audio 
Selection” in the “Sound” menu.

When recording bilingual audio with connecting to a decoder 
or a digital receiver
Select the audio type either “M1” or “M2” on the connected 
devices. (You cannot select the audio type on this unit.)

For your reference
[RAM]
≥Select the audio type both “M1” and “M2” on the connected 

devices. (You can also select the audio type on this unit.)

Note
[DVD-R]
≥You cannot use [AUDIO] (36) or the DISPLAY menu to change 

audio type when a DVD-R is in the disc tray.

ªTo check the remaining time and the current mode 

(15) several times.

(1) Available recording time and recording mode

(e.g.: “0:50 XP” indicates 50 minutes in XP mode)

Note
≥The message “Cannot record. Maximum number of 

programmes recorded.” is displayed if you try to start recording 
when there are already 99 programmes on a disc. Erase 
unneeded programmes (DVD-RAM/DVD-R) or use a new disc to 
continue recording.

≥Check that disc can be recorded on (page 9).

1

2

1

2

4

2

4

8

4

6

12

6

(1)

(2)

1

2

3

Reverse

Front

Turn over

π Remain           0:50  XP

0:07:21  6.8.

π PRG2  0:05.14  XP
π PRG1  0:00.10  SP

REC

PLAY

DVD-RAM

(1)

LR

DVD(PAL).book  21 ページ  ２００３年５月１日　木曜日　午後１０時４３分