Panasonic KX-TD816E Manual De Usuario

3-10

– To store the feature number to convert pulse signals to DTMF

signals, press the 

# keys.

(Refer to the Installation Manual, Section 3 “Pulse to Tone
Conversion.”)

– To prevent the display of all or part of the number, press

SECRET before and after confidential parts of the number.  The
SECRET button must always be entered in a pair.  Or your
entry is not stored. (Refer to the Installation Manual, Section 3
“Secret Dialling.”)

•  If you are storing an external number, include the line access code

(default=9, 81 through 88) before the number.  When dialling, a pause
is automatically inserted after the code.  If the programmed pause time
(in program [412] “Pause Time”) is 1.5 or 2.5 seconds, it is required to
store a pause manually after the line access code.

• If you are storing an account code, enter the account code before the

line access code.  (Refer to the Installation Manual, Section 3 “Account
Code Entry.”)

• If you are storing a number for CO Incoming Call Information Display

with name, enter “–” (hyphen) after the line access code.  The system
starts to compare the calling party’s number with the System Speed
Dialling Number stored after “–.” Example : 9–12345678  
(Refer to the Installation Manual, Section 3 “CO Incoming Call
Information Display.”)

• It is possible to store a number consisting of 25 digits or more by

storing it in two speed dial numbers.  A line access code should not be
stored in the second speed dial number.

• To go to another speed dial number at steps 3 through 6, press

SELECT and start with step 3.

• To display parts of the number which have scrolled off the display,

press 

or 

.

• Program [002] “System Speed Dialling Name Set” is used to give

names to speed dial numbers.

CO Incoming Call Information Display (4.2/DPT Features)

CO Incoming Call Information Log (4.2/DPT Features)

System Speed Dialling (4.2/DPT Features, 4.4/Special Display Features,

7.2/SLT and ISDN Telephone Features)