Panasonic KX-TD816E Manual De Usuario

Descargar
Página de 518
DPT Overview
1-25
1.1
Configuration
BLF on DSS Button
The Busy Lamp Field (BLF) indicates the status of corresponding extension by lighting
patterns: Red On/Off.  BLF lights red when the corresponding extension is busy, is set the
“Do Not Disturb (DND)” feature, or while in the check-in mode of the “Hotel Application.”
And BLF lights off when it is idle.  This is available for DSS buttons of DSS consoles and
for flexible CO buttons assigned as DSS buttons on proprietary telephones.
LED Indication
The Light Emitting Diode (LED) button indicators provide the line conditions with
lighting patterns.
Flashing light patterns
Slow flash
(60 flash/min.)
Moderate flash
(120 flash/min.)
Rapid flash
(240 flash/min.)
LED Indication on INTERCOM Button
The table below shows the lighting patterns and the intercom line conditions.
LED Indication on CO Button
The table below shows the lighting patterns and the CO line conditions.
INTERCOM button
Off
Green On
Green slow flash
Green moderate flash
Green rapid flash
Intercom Line Condition
Idle
Intercom call / Conference established
Intercom call hold
Intercom call exclusive hold / Consultation hold
Incoming intercom/doorphone call
— Item with * is available at Single-CO button only.
1 sec.
CO Button
Off
Green On
Green slow flash
Green moderate flash
Green rapid flash
Red On
Red slow flash
CO Line Condition
Idle
I-use
I-hold
I-exclusive hold
Hold Recall / Incoming call
Other-use / Log-out
Other-hold*