Panasonic DMRE20 Guía De Operación

To clean this unit, wipe with a soft, dry cloth.
≥Never use alcohol, paint thinner or benzine to clean this unit.
≥Before using chemically treated cloth, read the instructions that 

came with the cloth carefully.

Dust and dirt may adhere to the unit’s lenses over time, possibly 
making it impossible to record or play discs. 
Use the recommended DVD-RAM/PD lens cleaner 
(LF-K123LCA1) every 1 to 4 months, depending on frequency of 
use and the operating environment. 
Read the lens cleaner’s instructions carefully before use.

The precision parts in this unit are readily affected by the 
environment, especially temperature, humidity, and dust.
Observe the following points to ensure continued listening and 
viewing pleasure.

Do not use irregularly shaped discs, such as heart-shaped.
(These can damage the unit.)

ªHow to hold a disc

Do not touch the recorded surface.

ªIf there is dirt or condensation on the disc

If the disc is dirty, wipe with a damp cloth and then wipe dry.
Moisture may condense on discs after they are brought inside from 
the cold.
DVD-RAM and DVD-R
≥Clean and dry only with the DVD-RAM/PD disc cleaner available 

as an optional accessory, part number LF-K200DCA1. Do not 
use cleaners or clothes for CDs to clean DVD-RAM and DVD-R.

≥Never use cloths or cleaners for CDs, etc.

DVD-Video, Video CD and CD
Wipe it with a damp cloth and then wipe dry.

ªHandling precautions

≥Do not write on the label side with a ball-point pen or other writing 

instrument.

≥Do not use record cleaning sprays, benzine, thinner, static 

electricity prevention liquids or any other solvent.

≥Do not attach labels or stickers to discs. (Do not use discs with 

exposed adhesive from tape or left over peeled-off stickers.)

≥Do not use scratch-proof protectors or covers. 
≥Do not use discs printed with label printers available on the 

market.

≥Do not use discs that are badly warped or cracked.

ªDo not place or store discs in the following places

≥Locations exposed to direct sunlight
≥Humid or dusty locations
≥Locations directly exposed to a heat vent or heating appliance.

This is the compressed form of digital signals. A decoder decodes 
these signals into 5.1 surround and multi-channel signals.

Sound is divided into channels based on the sound’s role.
For example, 5.1 channel
≥Front speakers — 1 left channel and 1 right channel
≥Center speaker — 1 channel
≥Surround speakers — 1 left channel and 1 right channel
≥Subwoofer — 1 channelk0.1 (the ratio of bass to the total amount 

of sound output)

Examples as shown in the on-screen menus

(1) 1: Subwoofer signal 

(not displayed if there is no subwoofer signal)

(2) 0: No surround

1: Mono surround
2: Stereo surround (left/right)

(3) 1: Center

2: Front left

iFront right

3: Front left

iFront rightiCenter

This is a list of programmes you have recorded. You can select 
programmes from the list to view. The list also shows the date and 
time of recording, the channel, and the titles of titled programmes. 
The selected programme is played in the background, making 
selection even simpler.

This is a method of coding digital signals developed by Dolby 
Laboratories. Apart from stereo (2 channel) audio, these signals 
can also be 5.1-channel audio. A large amount of audio 
information can be recorded on one disc using this method.

A surround system where a 4-channel audio track is recorded as  2 
channels and then is restored to 4 channels for play. The surround 
channel is monaural.

This surround system is used in many movie theaters around the 
world. The separation between channels is good and the 
compression ratio is low, so realistic sound effects are possible.
DTS soundtracks are produced with the assumption that all 
channels will be used.

2

1

3

E-Text2.fm  87 ページ  ２００１年１０月２２日 月曜日 午前８時４８分