Panasonic DMC-TZ10 Guía De Operación

136

Format the disc with this software when the disc is used to record with this software. Discs 

formatted with software other than this software (e.g. Windows Explorer) cannot be used.

Format the memory card with a digital camera that is compatible with this software.

Commercially available DVD-RAM is formatted as UDF 2.0 format, so to record with AVCHD 

standard, it needs to be formatted to UDF 2.5 using this software.

The data cannot be recorded if the disc is set to protect. Remove the protect setting with the 

device that was used to set the protection. Or, it is possible to add if it is recorded with the 

AVCHD standard without removing the protection, if the auto protect setting is enabled.

For the DVD-R/RW, the recording can be stopped by clicking the [Cancel] while converting the 

data, but it cannot be stopped while recording the data.

The data cannot be recorded when the type of disc or formatting is not compatible with the 

recording format.

When a fast moving motion picture is recorded in DVD-Video format, outline may get fuzzy or 

noise may occur during the conversion. It may improve by setting the picture quality setting for 

the conversion to [Picture quality priority] in the [Motion detection settings] window.

When an MPEG2 motion picture with 16:9 is played with Windows Media Player or similar, it 

may be played back as 4:3.

Part of the outline of the motion picture may not be displayed when played back on some 

devices such as TV.

AVCHD standard discs or cards created using this software can only be played back with 

devices compatible with each format.

Play back with a device that is compatible to the type of disc.