Panasonic DMCTZ35EP Guía De Operación

Descargar
Página de 163
VQT4P25
Application (Record)
Taking pictures with flash
- 60 -
 
Available types in each mode 
(○: Available, –: Not available, 
: Default setting)
[Scene Mode]
 
 
*
1
*
1  
Set to 
 or 
 depending on the subject and brightness.
 •The flash cannot be used when recording motion pictures or in the 
,  ,  ,  , 
,  ,   and   Scene Modes.
 
Shutter speeds for each flash mode
 
 
1/60*
2
 - 1/2000th
 
1*
3
 - 1/2000th
*
Varies according to [Min. Shtr Speed] setting. 
*
3  
When [Min. Shtr Speed] is set to [AUTO], and a jitter is detected when [Stabilizer] is turned to 
[ON], the maximum speed is 1/4 second. Also varies according to [Intelligent Auto] Mode and 
Scene Modes, etc.
 
Do not put your hands over the light-emitting area of the flash 
 or look at it 
from close range.
Do not use the flash at close distances to other subjects (heat/light may 
damage subject).
 
Edges of picture may become slightly dark if using flash at short distances without 
using zoom (close to max. W). This may be remedied by using a little zoom. 
 
The effect of red-eye reduction varies depending on the subject and is affected by 
factors such as distance to the subject, whether the subject is looking at the camera 
during preliminary flash, and so on. In some cases, the effect of red-eye reduction 
may be negligible.
 
Flash settings may be changed when changing recording mode.
 
Scene Mode flash settings are restored to default when Scene Mode is changed.
 
No pictures may be taken if these marks (e.g.  ) are flashing (flash is charging).
 
If light from the flash on a subject is insufficient, neither the proper exposure nor White 
Balance is achieved.
 
The flash effect may not be sufficient in the following cases: 
 •Slow shutter speed
 •
 is set 
 
Flash charging may take time if battery is low or if using flash repeatedly.