Panasonic TH-42PH20ER Guía De Operación

Sound 

Normal 

Normalise 

Normal 

0 
0
0

Treble

Sound Mode 

Balance

Bass 

1/2

Press to display the Sound menu.

Press to select the menu to adjust.

Select the desired level by listening to the sound.

Note: Bass and Treble settings are memorized separately for each Sound Mode.

Select to adjust each item.

While the “Sound” menu is displayed, if either the N button on the remote control is pressed at any time or the 
ACTION (  ) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.

Normalise

Normal:  Emits the original sound.

Dynamic: Accentuates sharp sound.

Adjusts low pitch sounds.

Adjusts high pitch sounds.

Adjusts left and right volumes.

Press to exit from adjust mode.

This menu is displayed when HD-SDI Terminal Board with audio (TY-FB10HD) is installed to the unit.

2/2

Sound Out

Left Channel
Right Channel

Channel 1
Channel 1

Off

Level Meter

Off

SDI Sound Output

Selects left audio channel.

Selects right audio channel.

On: 

Enables audio output.

Off:  Disables audio output.

Sets audio channels to show in the audio level meter.

8 channels are displayed in the audio level meter; 4 channels 

each on both right and left sides of the display.

Off:  Hides the audio level meter.

1-8ch: Displays the audio level meter (1-8ch)

9-16ch: Displays the audio level meter (9-16ch)

Note:
This menu is available only when selecting 
a slot that HD-SDI Terminal Board with 
audio (TY-FB10HD) is installed.