Panasonic KX-TS620W Guía De Operación
Caller ID Service
29
For assistance, please visit http://www.panasonic.com/phonehelp
Storing Caller List
Information in the Direct
Dial memory
Information in the Direct
Dial memory
You can store numbers in the Caller List
to the Direct Dial memory ({M1}, {M2}
and {M3}).
to the Direct Dial memory ({M1}, {M2}
and {M3}).
Make sure that the handset is on the
cradle, the AC adaptor is connected
and the SP-PHONE/HEADSET
indicator light is off.
cradle, the AC adaptor is connected
and the SP-PHONE/HEADSET
indicator light is off.
1
Press {
4
}
or {
3
}
to enter the
Caller List.
2
Scroll to the caller you want to
store in the Direct Dial memory
by pressing {
store in the Direct Dial memory
by pressing {
4
}
or {
3
}
.
3
Press {FUNCTION/EDIT}.
• If the number requires editing, see
page 27.
4
Press {OK} (
Next key).
If there is name information for
the caller, “
the caller, “
Enter name” and
caller’s name will be
displayed. You can edit name
information.
displayed. You can edit name
information.
a) If you need to change the
name, enter the name (p. 32).
When finished, press {OK}
(
When finished, press {OK}
(
Next key).
b) If you do not need to change
the name press {OK}
(
(
Next key).
If there is no name information
for the caller “
for the caller “
Enter name”
will be displayed.
a) If a name is required, enter the
a) If a name is required, enter the
name (p. 32). When finished,
press {OK} (
press {OK} (
Next key).
b) If a name is not required,
press {OK} (
Next key).
5
Press {
4
}
.
6
Press one of the Direct Dial
button ({M1}, {M2} or {M3})
(
button ({M1}, {M2} or {M3})
(
Save key). (Example: {M1} is
pressed.)
If the Direct Dial button
selected is occupied, the
display will be shown as
below.
selected is occupied, the
display will be shown as
below.
To overwrite, press {OK}
(
(
Yes key).
To select the other empty Direct
Dial memory, press {
Dial memory, press {
3
}
(
No key)
and press an empty Direct Dial
button ({M1}, {M2} or {M3}).
button ({M1}, {M2} or {M3}).
• A long beep sounds.
• The display will return to Caller List.
• The display will return to Caller List.
You can continue storing other
items. To exit the programming
mode, press
items. To exit the programming
mode, press
{EXIT} or wait for 60
seconds.
• To erase other stored items from the
Direct Dial memory see page 37.
• To cancel during programming, press
{
EXIT}. Start again from step 1.
• You cannot store caller information in the
Direct Dial memory if a phone number is
not displayed.
not displayed.
[OK]= Next
444-7777
[OK]= Next
Enter name
S MITH,JACK
S MITH,JACK
[OK]=Save
>Save phonebook
Save M1,M2,M3
Save M1,M2,M3
M1 is occupied
[
]=No [OK]=Yes
Overwrite ?
TS620bk01.book 29 ページ 2006年5月29日 月曜日 午前10時25分