Panasonic TX-P42GT20B Guía De Operación
Frequently Asked
Questions
●
FAQs, etc.
107
Problem
Actions
3D
Cannot see 3D images
Has the 3D Eyewear been switched On?
●
Ensure that “Picture Display” in “3D Settings” is set to “3D”. (p. 33)
●
Some 3D image signals may not be automatically recognized as 3D
●
images. Set “Signal Format” in “3D Settings” to match the picture
format. (p. 33)
Check that there are no obstacles between the infrared sensors on
●
the TV and the 3D Eyewear. If the 3D Eyewear stops receiving the
infrared signal for about 5 minutes, the 3D Eyewear will be turned
off automatically.
Check the coverage area to use the 3D Eyewear. (p. 31)
●
Depending on the person, the 3D images may be difficult to see,
●
or cannot be seen, especially in users that have a different level of
eyesight between the left and right eyes.
Take the necessary steps (wearing glasses etc.) to correct your
eyesight before use.
3D Eyewear is turned off
automatically
Check that there are no obstacles between the infrared sensors on
●
the TV and the 3D Eyewear or that the 3D Eyewear is placed inside
the coverage area (p. 31). If the 3D Eyewear stops receiving the
infrared signal for about 5 minutes, the 3D Eyewear will be turned
off automatically.
There is something wrong with
the 3D images
Check the setting of “Picture Sequence” or “Edge Smoother”.
●
(p. 33)
HDMI
Sound is unusual
Set the sound setting of the connected equipment to
●
“2ch L.PCM”.
Check the “HDMI1 / 2 / 3 / 4 Input” setting in the Sound Menu. (p. 37
●
)
If digital sound connection has a problem, select analogue sound
●
connection. (p. 102)
Pictures from external
equipment are unusual
when the equipment is
connected via HDMI
Check the HDMI cable is connected properly. (p. 98)
●
Turn the TV and equipment Off, then turn them On again.
●
Check an input signal from the equipment. (p. 104)
●
Check the output resolution of the equipment.
●
Use equipment compliant with EIA/CEA-861/861B.
●