Panasonic KXHNC800E Guía De Operación
Initial setup (for Android device
users)
users)
R Do not perform this procedure
R If your mobile device is
already registered to a hub
and you want to use your
camera by itself, see
“Information for current hub
users”, page 24.
and you want to use your
camera by itself, see
“Information for current hub
users”, page 24.
1
Plug in the camera and wait
about 1 minute for the
camera’s LED to light in green.
R If the LED does not light in
about 1 minute for the
camera’s LED to light in green.
R If the LED does not light in
green, or if you experience
trouble during this
procedure, reset the
camera (page 27) and
then repeat this procedure.
trouble during this
procedure, reset the
camera (page 27) and
then repeat this procedure.
2
Start the [Home Network]
app.
R If prompted, follow the
app.
R If prompted, follow the
on-screen instructions and
select the appropriate
region/country.
select the appropriate
region/country.
3
Tap [HD Camera].
4
Tap [Set up the HD Camera].
5
When prompted, press the
MSETUPN button on the back
of the camera.
R The LED indicator blinks in
MSETUPN button on the back
of the camera.
R The LED indicator blinks in
green.
R The app temporarily
changes your mobile
device’s Wi-Fi setting so
that it connects to the
camera directly.
device’s Wi-Fi setting so
that it connects to the
camera directly.
6
If necessary, enter the
password required to connect
to your wireless router and
then tap [Next].
R The camera and your
password required to connect
to your wireless router and
then tap [Next].
R The camera and your
mobile device connect to
your wireless router.
your wireless router.
R If you enter the wrong
password, an error is
displayed. Repeat the initial
setup procedure from the
beginning.
displayed. Repeat the initial
setup procedure from the
beginning.
7
When prompted, press the
MSETUPN button on the back
of the camera.
R The camera registers your
MSETUPN button on the back
of the camera.
R The camera registers your
mobile device.
8
When prompted, set the
password that will be used to
access the camera.
password that will be used to
access the camera.
9
When prompted, enter a
name for your mobile device
and then tap [OK].
R This setting allows you to
name for your mobile device
and then tap [OK].
R This setting allows you to
change the name assigned
Helpline Tel. No.: U.K. 0330 3331112 Ireland 01 4475228
23
Setup
HNC800E_(en_en)_0222_ver.101.pdf 23
2017/02/22 13:28:39