Panasonic TH-50BT300ER Guía De Operación
11
How to use the Ferrite core
Notes:
• Make sure the broadband router or hub supports 10BASE-T/100BASE-TX.
• To connect a device using 100BASE-TX, use “category 5” LAN cable.
• Touching the LAN terminal with a statically charged hand (body) may cause damage due to its discharge.
Do not touch the LAN terminal or a metal part of the LAN cable.
• For instructions on how to connect, consult your network administrator.
• Make sure the broadband router or hub supports 10BASE-T/100BASE-TX.
• To connect a device using 100BASE-TX, use “category 5” LAN cable.
• Touching the LAN terminal with a statically charged hand (body) may cause damage due to its discharge.
Do not touch the LAN terminal or a metal part of the LAN cable.
• For instructions on how to connect, consult your network administrator.
Display (main unit, rear)
Hub or broadband router
LAN cable
(not supplied)
(not supplied)
COMPUTER
Less
than
10 cm
than
10 cm
Less
than
10 cm
than
10 cm
Ferrite core
(supplied)
(supplied)
Ferrite core
(supplied)
(supplied)
Installing the Ferrite core
Pull back the tabs
(in two places)
(in two places)
Wind the cable
twice
twice
Open
Press the cable
through and close
through and close