Panasonic TH-65VX300ER Guía De Operación
51
Setup menu
Signal
Waveform Monitor
Marker settings
RGB/MONO settings
Extended life settings
Screensaver
Network Setup
Input label
Function Button Settings
On/Off Timer Setup
Day/Time Setup
3D Settings
The RGB/MONO settings function is also enabled/disabled with the FUNCTION button on the remote control (see
page 63).
page 63).
RGB
Mode Select
On
R On/Off
On
G On/Off
On
B On/Off
RGB/MONO settings
RGB
Mode Select
On
R On/Off
On
G On/Off
On
B On/Off
RGB/MONO settings
RGB
Mode Select
On
R On/Off
On
G On/Off
On
B On/Off
RGB/MONO settings
2
access
1
select
2
change
1
select
2
change
1
select
RGB: Displays with one of red, green and blue signals cut.
Blue only: Displays in solid blue.
MONO: Only Y signal is used for black and white displays.
Blue only: Displays in solid blue.
MONO: Only Y signal is used for black and white displays.
PC
16:9
NANODRIFT
R Off
Note:
With MONO set, the colour adjustment in the Picture menu is not available.
When the setting of each item is enabled, the item being currently set to ‘Enable’ becomes disabled.
With MONO set, the colour adjustment in the Picture menu is not available.
When the setting of each item is enabled, the item being currently set to ‘Enable’ becomes disabled.
RGB/MONO settings
Turn off R, G, B signals to adjust the image.
When the function is enabled, selected mode is displayed.
1
Select mode by “Mode Select”.
2
Confi gure each mode setting.
• R On/Off, G On/Off, B On/Off
Off
On
On: The red (for “R On/Off”), green (for “G On/Off”) or blue (for “B On/Off”) signal is on.
Off: The red (for “R On/Off”), green (for “G On/Off”) or blue (for “B On/Off”) signal is cut.
For Blue only mode
Blue only
Mode Select
On
Blue only
RGB/MONO settings
• Blue only
Off
On
On: The Blue only mode is enabled.
Off: The Blue only mode is disabled
For MONO mode
MONO
Mode Select
On
MONO
RGB/MONO settings
• MONO
Off
On
On: The MONO mode is enabled.
Off: The MONO mode is disabled
For RGB mode