Panasonic TX-P46VT20B Guía De Operación
112
On screen messages
Message
Meaning / Action
No channel found.
Please check aerial or local signal
availability.
Press OK to start Auto Setup.
Follow the on screen instructions.
●
Please also refer to p. 107.
●
If channels are still not found, consult your local Panasonic dealer.
●
No module inserted
Check the CI module is inserted completely (p. 64).
●
No recording - Already recording
The equipment may already be recording.
●
No recording - Check media
The tape or disc may be “write protected”, full, missing or damaged.
●
No recording - Playing
The equipment may be playing the tape or disc.
●
No recording - Unknown reason
The recording may not be performed. Check the equipment.
●
No service
The broadcaster has stopped the service. Check the channel in the TV
●
Guide. (p. 20)
No signal
The TV cannot detect the signal. Check the connection of the RF cable.
●
Overcurrent error on USB device
occurred.
Please remove the USB device, and
switch off the TV by mains power switch.
The connected USB device might cause overcurrent error. Follow the on
●
screen instructions.
Check if foreign objects are inside the USB port.
●
PIN incorrect!
The PIN number you entered is wrong.
●
Please check settings and connections
on HDMI devices.
Communication error in VIERA Link function (p. 95).
●
Please enter a frequency between
10700 and 12750 MHz.
The frequency you entered is out of range. Consult the received satelite
●
broadcasting company. (p. 54)
Please wait.
A function is in progress.
●
Recording this channel now
The recorder is recording the programme from its own tuner. You can turn
●
the TV off and leave the equipment recording in the normal way.
Reset to Factory Shipping Condition
Completed.
Please switch off TV.
“Auto Setup” will automatically start when Mains power On / Off switch is
●
next turned On. (p. 12)
Sending Preset Data
Q-Link or VIERA Link channel download is in progress.
●
Software successfully updated.
Press EXIT to continue.
The software updating is finished.
●
Software update failed. Please try again
later.
Press EXIT to continue.
Perform “System Update Search Now” in System Update (p. 65).
●
If this is still unsuccessful, there may not be any new software available.
The device is not directly connected to
the TV.
The device may not work correctly.
Please do not connect the device via a USB HUB.
●
This timer will not follow the TV Guide
information.
Press OK to continue, RETURN to restore
original timer.
If you edit the start time or end time of Guide link programming by more
●
than 10 minutes, it will no longer be performed as Guide link programming.
The programming will be performed according to the time setting.