Panasonic TH-50BT300ER Guía De Operación

Pressing the FUNCTION button can display the FUNCTION button guide to refer for the function of each button.

Assigning functions to the FUNCTION button on the remote control enables a user to switch 

between show/hide and modes with just a single touch of a button. The function settings are 

confi gured by using “Function Button Settings” in the Setup menu (see page 56).

The button functions are confi gured in two ways depending on the setting (On/Off) of “Studio 

mode” in the Options menu. Similarly, factory default settings vary as follows. 

Waveform Monitor

Marker settings

HV Delay

Blue only

3D Settings

Signal

Colour gamut

Scrolling bar

Off timer

External scaler mode

Test Patterns

Blue only

3D Settings

Signal

Colour gamut

Scrolling bar

If the guide display is not needed, set “Function Button Guide” in “Function Button Settings” to “Off” (see page 56).

The operation starts.

Function
1:Waveform Monitor

2:Marker settings

3:HV Delay

4:Blue only

6:Signal

7:Colour gamut

8:Scrolling bar

5:3D Settings

The menu is displayed.
(Example: 3D Settings)

On

3D Function

Auto

3D Picture Format

3D Settings

Safety Precautions

3D

3D Viewing Mode

On

3D Colour Compensation

Normal

3D Picture Sequence

Pressing the FUNCTION button clears the menu. 

Confi rmation screen (Example: Scrolling bar)

Press to select 

“Yes”.

Press.

The operation starts.

Yes

No

Function

Scrolling bar

Activates the “Scrolling bar only” screensaver. After 
15 minutes, the display enters standby mode.

To exit this mode, press any button.

Note:
“PC Power management”, “DVI-D Power management” and “No signal power off” are deactivated during “Scrolling 
bar” or “Test Patterns” operation. (see page 42)

Each time you press  , a different test pattern is displayed 
(seven in all).

Color Bars

Red

Green

Blue

Frame

(2 lines × 2 dots)

Black

1% window

To exit this mode, press any button other than  .