B+B SmartWorx Spectre Network Gateways Guia De Especificaciones
International Office: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104
European Office: Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445
orders@bb-elec.com
support@bb-elec.com
Spectre Network Gateway
SPECIFICATIONS
INTERFACES
Standard
Ethernet
Ethernet
10/100 Mbps
USB
USB Type A host
Binary I/O
1 input / 1 output
SIM Card
2 SIM card ports
802.15.4E radio
Expansion Port Options
Ethernet 10/100 Mbps
RS-232
RS-422/485
ANTENNA:
SMA – 50 Ohms
3G: 2 dBi, penta band, right angle dipole (2 included)
802.15.4e, 2.4 GHz, 5 dBi (1 included)
3G: 2 dBi, penta band, right angle dipole (2 included)
802.15.4e, 2.4 GHz, 5 dBi (1 included)
3G CELLULAR FREQUENCY BANDS
Quad Band UMTS (WCDMA): 850, 900,1900 and 2100 MHz
Quad-Band GSM/GPRS/EDGE: 850, 900, 1800 and 1900 MHz
Quad-Band GSM/GPRS/EDGE: 850, 900, 1800 and 1900 MHz
POWER
Source
10 – 30 VDC
Consumption
300 mW receive mode
Up to 3.5 W (GPRS transmission)
Up to 5.5 W (UMTS/HSDPA transmission)
MECHANICAL
Dimensions
1.7 x 3.0 x 4.5 in (42 x 76 x 113 mm), 35mm DIN rail
Enclosure
Metal
Weight
150 g
ENVIRONMENTAL
Operating
Temperature
-30 to +60°C
Storage Temperature -40 to +85°C
FEATURES -- SMARTMESH IP RADIO -- 802.15.4E -- 2.4 GHZ
Parameter
Conditions
Min
Typ
Max
Units
Frequency Band
2400
2.4835 GHz
Number of Channels
15
Channel Separation
5
MHz
Channel Clear
Frequency
2405 +
5*(k-11)
MHz
Modulation
IEEE 802.15.4 Direct
Sequence Spread
Spectrum (DSSS)
Raw Data Rate
250
kbps
Range
25 °C, 50% RH, +2dBi
Omni-Directional
Antenna, Antenna 2 m
m
Indoor
100
m
Outdoor
300
m
Free Space
1200
m
Receiver Sensitivity
Packet Data Error Rate
(PER) = 1%
-93
dBm
Receiver Sensitivity
PER = 50%
-95
dBm
Output Power -- Delivered to a 50 Ω load
High Calibration
High Calibration
Setting
8
dBm
Low Calibration
Setting
0
dBm
NETWORKING AND SECURITY
DHCP – automatic IP addressing in LAN network
NAT – IP address and ports translation between inside/outside network
Firewall – filtering of addresses, ports, protocols
VRRP – virtual backup router function
DynDNS client – access to the router with a dynamic IP address
QoS – quality of service
Dial-in – Communicate via CSD call
PPPoE Bridge – PPP frames encapsulation inside ETH frames
IPsec, OpenVPN, L2TP – secure encrypted tunnels
GRE tunnel – simple tunnel without security measures
NAT – IP address and ports translation between inside/outside network
Firewall – filtering of addresses, ports, protocols
VRRP – virtual backup router function
DynDNS client – access to the router with a dynamic IP address
QoS – quality of service
Dial-in – Communicate via CSD call
PPPoE Bridge – PPP frames encapsulation inside ETH frames
IPsec, OpenVPN, L2TP – secure encrypted tunnels
GRE tunnel – simple tunnel without security measures
CONFIGURATION AND DIAGNOSTICS
HTTP server – configuration via web server
Telnet – configuration and access to the file system
SNMP – router diagnostics, communication with I/O and M-Bus
Cellular state signalization by LED
On-line info on cellular signal status (level, cell, neighbors)
SMS info – power on, cellular connection or disconnection
SMS control – on/off cellular connection, switch SIM, I/O, etc.
Transferred data counting, one more APN as backup
Remote router group configuration change, switching among configuration profiles
SSH – encrypted configuration and access to the file system
Telnet – configuration and access to the file system
SNMP – router diagnostics, communication with I/O and M-Bus
Cellular state signalization by LED
On-line info on cellular signal status (level, cell, neighbors)
SMS info – power on, cellular connection or disconnection
SMS control – on/off cellular connection, switch SIM, I/O, etc.
Transferred data counting, one more APN as backup
Remote router group configuration change, switching among configuration profiles
SSH – encrypted configuration and access to the file system
APPROVALS / CERTIFICATIONS
FCC Part 15, CE
Class 1/Division 2
Class 1/Division 2
Certifications
AT&T, Verizon, PTCRB (
Contact B&B Electronics for the latest
approvals.)
CE
EN 301 511, v9.0.2
EN 301 908-1&2, v3.2.1
ETSI EN 301 489-1 V1.8.1
EN 60950-1:06 ed.2 + A11:09 + A1:10
Emission
EN 55022/B
Immunity
ETS 300 342 immunity
Safety
EN 60950
Isolation
EN 60747 isolation