Puls YRM2.DIODE Redundancy Module Guia De Especificaciones
YRM2.DIODE
Y-Series
DC24-48V,
20A,
D
UAL
R
EDUNDANCY
M
ODULE
19. A
CCESSORIES
ZM1.WALL Wall mounting bracket
This standard bracket is used to mount the YR40 redundancy module onto a flat surface without utilizing a DIN-Rail.
Fig. 19-1 ZM1.WALL Wall mounting bracket
Fig. 19-2 Assembled wall mounting bracket
ZM11.SIDE Side mounting bracket
This bracket is used to mount the YR80 redundancy module sideways with or without utilizing a DIN-Rail.
The two aluminum brackets and the black plastic slider of the unit have to be detached, so that the steel brackets can
be mounted.
be mounted.
For sideway DIN-rail mounting, the removed aluminum brackets and the black plastic slider need to be mounted on
the steel bracket.
the steel bracket.
Fig. 19-3
ZM11.SIDE Side mounting bracket
Fig. 19-4
Side mounting with DIN-rail brackets
May 2010 / Rev. 1.2 DS-YRM2.DIODE-EN
All parameters are specified at 24V, 20A output current, 25°C ambient and after a 5 minutes run-in time unless otherwise noted
All parameters are specified at 24V, 20A output current, 25°C ambient and after a 5 minutes run-in time unless otherwise noted
www.pulspower.com Phone +49 89 9278 0 Germany
13/18