BDI Avion 8925 Series II Manual De Propietario
3
ASSEMBLY
INSTRUCTIONS
BDIUSA
.
COM
CUSTOMERSERVICE
@
BDIUSA
.
COM
Step 6
Optional fabric speaker or glass insert panel
Optional fabric speaker or glass insert panel
Avion’s drawer and door fronts feature removable/replaceable
panel inserts to permit customization of your cabinet’s appearance
and utility. (Contact BDI Customer Service at customerservice@
bdiusa.com)
panel inserts to permit customization of your cabinet’s appearance
and utility. (Contact BDI Customer Service at customerservice@
bdiusa.com)
Installing optional panel inserts is quick and easy:
1. From the inside of the door, and starting at one corner of
the pre-installed Glass or Speaker panel insert, carefully pull away
all four sections of the panel retention trim, running along the
perimeter of the insert. (Use a blunt, tapered object or your finger
to start removing the rubber material.)
2. Once the trim material is completely pulled away, remove the
pre-installed panel insert and replace it with the desired panel
insert.
3. Re-install the trim, pressing it carefully back into the groove
around the new panel insert, section by section, to complete the
panel insert installation.
1. From the inside of the door, and starting at one corner of
the pre-installed Glass or Speaker panel insert, carefully pull away
all four sections of the panel retention trim, running along the
perimeter of the insert. (Use a blunt, tapered object or your finger
to start removing the rubber material.)
2. Once the trim material is completely pulled away, remove the
pre-installed panel insert and replace it with the desired panel
insert.
3. Re-install the trim, pressing it carefully back into the groove
around the new panel insert, section by section, to complete the
panel insert installation.
Step 5
Install both Back Panels (M) to the backside of the cabinet.
*Note: Velcro straps are included as wire management for your
convenience.
Install both Back Panels (M) to the backside of the cabinet.
*Note: Velcro straps are included as wire management for your
convenience.
a. Remove rubber trim and
glass panel.
glass panel.
b. Replace insert panel