Canon EOS 5D Mark IV L-series Zoom Lens Kit Manual De Propietario
63
Connecting via WPS (PBC Mode)
7
Select [WPS (PBC mode)].
Select [OK] and press <0> to go to
the next screen.
the next screen.
8
Connect to the access point.
Press the access point’s WPS button.
For details about where the button is
located and how long to press it, refer
to the access point’s instruction
manual.
For details about where the button is
located and how long to press it, refer
to the access point’s instruction
manual.
Select [OK] and press <0> to
establish a connection with the
access point.
establish a connection with the
access point.
When a connection with the access
point is established, the next screen
is displayed.
point is established, the next screen
is displayed.
9
Select [Auto setting].
Select [OK] and press <0> to
display the setting screen for the
Wi-Fi function selected in step 4
(p.64).
display the setting screen for the
Wi-Fi function selected in step 4
(p.64).
If [Auto setting] results in an error or
if you want to specify the settings
manually, see page 174.
if you want to specify the settings
manually, see page 174.
The IP address can only be set automatically in environments using DHCP
servers, or access points or routers with DHCP server functionality, such
that the IP addresses, etc. are required to be assigned automatically.
servers, or access points or routers with DHCP server functionality, such
that the IP addresses, etc. are required to be assigned automatically.