Canon EOS 5D Mark IV L-series Zoom Lens Kit Manual De Propietario
67
Connecting via WPS (PIN Mode)
8
Specify the PIN code at the
access point.
access point.
At the access point, specify the 8-digit
PIN code displayed on the camera’s
LCD monitor.
PIN code displayed on the camera’s
LCD monitor.
For instructions on setting PIN codes
at the access point, refer to the
access point’s instruction manual.
at the access point, refer to the
access point’s instruction manual.
After the PIN code is specified, select
[OK] and press <0>.
[OK] and press <0>.
9
Connect to the access point.
Select [OK] and press <0> to
establish a connection with the
access point.
establish a connection with the
access point.
When a connection with the access
point is established, the next screen
is displayed.
point is established, the next screen
is displayed.
10
Select [Auto setting].
Select [OK] and press <0> to
display the setting screen for the Wi-
Fi function selected in step 4 (p.68).
display the setting screen for the Wi-
Fi function selected in step 4 (p.68).
If [Auto setting] results in an error or
if you want to specify the settings
manually, see page 174.
if you want to specify the settings
manually, see page 174.
The IP address can only be set automatically in environments using DHCP
servers, or access points or routers with DHCP server functionality, such
that the IP addresses, etc. are required to be assigned automatically.
servers, or access points or routers with DHCP server functionality, such
that the IP addresses, etc. are required to be assigned automatically.