Alpine INE-W960HDMI Manual De Propietario
39
-EN
• Settings exceeding the frequency of adjacent bands are not available.
• While adjusting the Parametric EQ, you should consider the
• While adjusting the Parametric EQ, you should consider the
frequency response of the connected speakers.
• When the parametric EQ is adjusted, the adjustment for EQ Presets
becomes ineffective.
• When EQ Presets is set, the interlinked Parametric EQ settings are
also changed. Band2 of Parametric EQ is also interlinked with the
Bass adjusted setting value, and Band8 is interlinked with the Treble
adjusted setting value. We recommend storing Parametric EQ
settings in the Preset in advance.
Bass adjusted setting value, and Band8 is interlinked with the Treble
adjusted setting value. We recommend storing Parametric EQ
settings in the Preset in advance.
• Touch [Flat] to initialize all values.
• The Parametric EQ setting can be configured when Defeat is “Off.”
• The Parametric EQ setting can be configured when Defeat is “Off.”
Calling the Parametric EQ adjusted value
Calling the pre-set Parametric EQ adjusted value.
Touch [Preset1], [Preset2], or [Preset3] on the
Parametric EQ screen.
Parametric EQ screen.
The setting stored in the Preset will be recalled.
Other Setting
[Other] is selected on the Sound setup menu in step 3. Refer to “Sound
Setup Operation” (page 34).
Setup Operation” (page 34).
You can change the volume of the sound heard when a button is
touched.
touched.
Setting item: Volume
Key Sound Feedback
Setting contents: 0 to 7 (Initial setting: 5)
The volume level for each source can be adjusted.
Setting item: Source Volume Setup
Radio / DVD / CD /
Compressed Media / iPod Music / iPod Video /
Pandora / AUX / Bluetooth Audio
Pandora / AUX / Bluetooth Audio
*
1
/ SiriusXM
*
2
Setting contents: -14 to +14 (Initial setting: 0)
*
1
Bluetooth Pandora correspond to Bluetooth Audio.
*
2
INE-W960/INE-NAV-60 only.
• Settable source differ depending on the connected device and
settings.
You can set the rear speaker output to “Off.”
Setting item: Rear Speaker
Setting contents: On (Initial setting) / Off
Setting contents: On (Initial setting) / Off
If an optional subwoofer is connected to the unit, make the following
setting.
setting.
Setting item: Subwoofer
Setting contents: On / Off (Initial setting)
Setting contents: On / Off (Initial setting)
The subwoofer output phase is toggled Subwoofer Normal (0°) or
Subwoofer Reverse (180°).
Subwoofer Reverse (180°).
Setting item: Subwoofer Phase
Setting contents: 0° / 180° (Initial setting: 0°)
Setting contents: 0° / 180° (Initial setting: 0°)
• If the Subwoofer setting is “Off,” the setting cannot be set.
Setting Defeat
[Defeat] is selected on the Sound setup menu in step 3. Refer to “Sound
Setup Operation” (page 34).
Setup Operation” (page 34).
Setting item: Defeat
Setting content: Off (Initial setting) / On
Setting content: Off (Initial setting) / On
• When Defeat is set to “ON,” the Car Specific Sound Setup/MX
(Media Xpander)/EQ Presets/Parametric EQ switch cannot be
selected.
selected.
• Defeat is changed to “Off” if you set BASS ENGINE SQ of Quick
Sound Setting to “ON.”
Volume Setting
Setting the Volume for Each Source
Rear Speaker Setting
Turning Subwoofer On/Off
Setting the Subwoofer Phase