Sony CDX-G1200U Manual De Propietario
19
GB
Audio file cannot be played.
USB device formatted with file systems
USB device formatted with file systems
other than FAT16 or FAT32 are
unsupported.*
unsupported.*
* This unit supports FAT16 and FAT32, but some USB
device may not support all of these FAT. For
details, refer to the operating instruction of each
USB device or contact the manufacturer.
details, refer to the operating instruction of each
USB device or contact the manufacturer.
Operations for skipping an album,
skipping items (Jump mode), and
searching a track by name (Quick-
BrowZer) cannot be performed.
These operations cannot be performed
skipping items (Jump mode), and
searching a track by name (Quick-
BrowZer) cannot be performed.
These operations cannot be performed
The USB mode of the device is not set to
the appropriate mode.
– Make sure that the USB mode of the
– Make sure that the USB mode of the
device is set to MSC/MTP mode.
The sound cannot be output during
playback in Android mode.
While the unit is in Android mode, the
playback in Android mode.
While the unit is in Android mode, the
sound outputs only from the Android
smartphone.
– Check the status of the audio playback
smartphone.
– Check the status of the audio playback
application on the Android smartphone.
– Playback may not perform properly
depending on the Android smartphone.
Messages
The following messages may appear or flash
during operation.
during operation.
CD ERROR: The disc cannot be played. The
disc will be ejected automatically.
Clean or insert the disc correctly, or make
disc will be ejected automatically.
Clean or insert the disc correctly, or make
sure the disc is not blank or defective.
CD NO MUSIC: There is no playable file. The
disc will be ejected automatically.
Insert a disc containing playable files
disc will be ejected automatically.
Insert a disc containing playable files
CD PUSH EJT: The disc could not be ejected
properly.
Press (eject).
properly.
Press (eject).
HUB NO SUPRT: USB hubs are not
supported.
supported.
INVALID
The selected operation could be invalid.
The selected operation could be invalid.
NOT SUPPORT - ANDROID MODE
A USB device not supporting AOA
A USB device not supporting AOA
(Android Open Accessory) 2.0 is
connected to the unit while [USB MODE] is
set to [ANDROID].
– Set [USB MODE] to [MSC/MTP] (page 12).
connected to the unit while [USB MODE] is
set to [ANDROID].
– Set [USB MODE] to [MSC/MTP] (page 12).
OVERLOAD: The USB device is overloaded.
Disconnect the USB device, then press SRC
Disconnect the USB device, then press SRC
to select another source.
The USB device has a fault, or an
unsupported device is connected.
READ: Now reading information.
Wait until reading is complete and
Wait until reading is complete and
playback starts automatically. This may
take some time depending on the file
organization.
take some time depending on the file
organization.
USB ERROR: The USB device cannot be
played.
Connect the USB device again.
played.
Connect the USB device again.
USB NO DEV: A USB device is not connected
or recognized.
Make sure the USB device or USB cable is
or recognized.
Make sure the USB device or USB cable is
securely connected.
USB NO MUSIC: There is no playable file.
Connect a USB device containing playable
Connect a USB device containing playable
files (page 16).
USB NO SUPRT: The USB device is not
supported.
For details on the compatibility of your
supported.
For details on the compatibility of your
USB device, visit the support site on the
back cover.
back cover.
or
: The beginning or the end
of the disc has been reached.
(underscore): The character cannot be
displayed.