Parrot Bebop 2 Quadcopter Manual De Propietario

Flying

Note:

To obtain high quality photos, make sure that the Bebop 2 is set in

photo mode. To do so, see

Recording a
video

The video recording starts automatically when you press

Take off

. The

button blinks during recording.
To stop the video record, press

. To start a new video, press

again.

The video recording stops after 25 minutes of recording.

Note:

It is not possible to record a video when the Bebop 2 is set in

timelapse mode. To deactivate timelapse mode, see

Retrieving photos and videos

You can retrieve photos and/or videos taken with the Bebop 2:

on your smartphone, using the FreeFlight 3 application,

on your computer, using a USB/micro USB cable (supplied).

Retrieving photos and videos on your smartphone

To retrieve photos and videos from the FreeFlight 3 application:

1. On your smartphone, launch the FreeFlight 3 application.
2. Go to

Internal memory

> The list of photos and videos stored in the Bebop 2 internal memory appears.

3. Select one or several photos and/or videos.
4. Press

Transfer

to retrieve the photos and/or videos on your smartphone.

5. Press

Delete

if you want to delete the photos and/or videos from the internal memory

of the Bebop 2.

Retrieving photos and videos on your computer

Windows :

1. Connect the Bebop 2 to your computer with the USB/micro USB cable (supplied).

2. Switch the Bebop 2 on.

> Your computer detects the Bebop 2 automatically. Wait until the driver installation

is complete. A pop-up appears like the one shown below.