GoPro HERO5 Session Manual De Propietario
54
55
Spot Meter
Spot Meter is good for capturing photos in a setting where the lighting
is different from where you are. Examples include capturing photos
of the outdoors from within a car or in a shaded environment while
standing in the sun. Spot Meter automatically sets the exposure based
on a single spot in the middle of the image, rather than on the entire
frame. The options for this setting are Off (default) and On.
Note: Changes that you make to Spot Meter in
Multi-Shot settings apply only to multi-shot capture.
To adjust this setting for video capture, adjust Spot Meter in
Video settings. To adjust this setting for
photo capture, adjust Spot Meter in
Photo settings.
/ Multi-Shot Settings
SETUP MODE SETTINGS
In
Setup mode, you can change settings that apply to all camera
modes. To change a setting in this mode, your camera must be
connected to the GoPro App for mobile or a GoPro remote. For more
information, see
connected to the GoPro App for mobile or a GoPro remote. For more
information, see
Accessing All Modes and Settings
(page 32).
When you disconnect your camera from the app or the remote, your
camera saves the settings.
camera saves the settings.
/ Setup Mode