Biketronics BT1004X Fairing and Wiring Kit Manual De Propietario

t If not already attached, crimp contact pins to aftermarket harness rear 

speaker wires (green and purple outputs). If terminals are not available you 

can strip and insert approximately 3/8” of the wires instead.

t Use heat shrink tubing to insulate crimp portion of contact pin.

t Insert contacts into the rear speaker harness connection (the one not used 

by the Biketronics module) according to wire map and diagram below.

t Fasten using electrical tape or zip ties so that pins do not come loose.

t Note: Harley-Davidson

Green/Black (-)

Green (+)

Purple (+)

Purple/Black (-)

Purple/Black (-)

Purple (+)

Green/Black (-)

Green (+)