Bluesound Pulse Soundbar Manual De Propietario

KICKSTAND FEET (REMOVABLE) :źb”†ªźº£q}–ªźÇ”†źGX1NźN=X7Jź°ªź–ÇÁź°ÖªŘźqÇÇq}”źÇ”†źÁ̺º£–†‚ź 
/–}¡ÁÇqª‚ź††Çź°½źÁ̺º°½Çŝź†º†ª‚–ªź°ªźÇ”†źÁº†q¡†½ź°½–†ªÇqǖ°ªŘźÜ°Ìź©qÜźª††‚źÇ°źq‚‚ź/–}¡ÁÇqª‚źÛdžª‚†½Áź 
(supplied) to ensure the Kickstand Feet are long enough to support your PULSE SOUNDBAR.

SUBW OUT : The SUBW OUT connection can be used with a subwoofer cable (not provided). This is an optional  
connection since the PULSE SOUNDBAR can be connected to a Bluesound PULSE SUB or RT100 wireless adaptor  
ǔ½°Ì”źqź|̖£ÇٖªźÖ–½†£†ÁÁź}°ªª†}ǖ°ªŝź°½źÖ–½†‚źÁÌ|Ö°°†½ÁŘźÌÁ†źÇ”†źNXbź=XSźº°½Çŝź°ªª†}Çź°ª†ź†ª‚ź°źqźÁÌ|Ö°°†½ź 
cable to the SUBW OUT on the PULSE SOUNDBAR and the other end to the corresponding input on the subwoofer.

AUDIO IN R/L :źźXÁ–ªźÇ”†źNdž½†°źJźÇ°źJź}q|£†źº½°Õ–‚†‚Řź}°ªª†}Çź°ª†ź†ª‚źÇ°źÇ”†źÌ‚–°ź%ªźJŤ1ź°źÇ”†ź 
PULSE SOUNDBAR and the other end to the corresponding RCA output of a television or other audio source.  
The source will show as an Analog Input in the Navigation Drawer of the BluOS App.

OPTICAL IN : XÁ–ªźqź––Çq£ź=ºÇ–}q£źÌ‚–°źq|£†źŪª°Çźº½°Õ–‚†‚ūŘź}°ªª†}Çź°ª†ź†ª‚źÇ°źÇ”†ź=ºÇ–}q£ź%ªź°źÇ”†ź 
PULSE SOUNDBAR and the other end to the corresponding digital optical output of a television. The source will  
show as an Optical Input in the Navigation Drawer of the BluOS App.

USB (TYPE B) :źXÁ†źÇ”†źNJa%źº°½Çź–ªź}°ª Ìª}ǖ°ªźÖ–Ç”źXNźŪSܺ†źź6–ª–ūźÇ°ź–ª–Ç–q££Üź£°q‚źç½©Öq½†ź°ªźÇ”†źG£q܆½ŝź 
This is not for consumer use. Only Authorized Bluesound Service personnel can access this USB port and  
SERVICE control button.

USB (TYPE A) : Connect a USB mass storage device to the USB input. Typical USB mass storage devices compatible 
֖ǔźÇ”†źGX1NźN=X7Jź–ª}£Ì‚†źº°½Çq|£†źèqÁ”ź©†©°½Üź‚†Õ–}†Áźqª‚ź†Ûdž½ªq£ź”q½‚ź‚½–Õ†ÁźŪSņŅź°½©qÇdž‚ūŝ

LAN PORT : The LAN PORT connection can be used with the Ethernet cable provided.  This is an optional  
connection since the PULSE SOUNDBAR can be connected to the network through a Wi-Fi connection to your router.  
To setup the PULSE SOUNDBAR  using the LAN Port a Wired Ethernet connection is required. Using the Ethernet  
}q|£†źº½°Õ–‚†‚Řź}°ªª†}Çź°ª†ź†ª‚ź°źÇ”†źÇ”†½ª†Çź}q|£†źÇ°źÇ”†ź17źº°½Çź°źÜ°Ì½źÖ–½†‚źÇ”†½ª†Çź|½°q‚|qª‚ź½°Ìdž½ź 
and the other end to the PULSE SOUNDBAR’s LAN port.

SERVICE :źXÁ†źÇ”†źNJa%źº°½Çź–ªź}°ª Ìª}ǖ°ªźÖ–Ç”źXNźŪSܺ†źź6–ª–ūźÇ°ź–ª–Ç–q££Üź£°q‚źç½©Öq½†ź°ªźÇ”†źG£q܆½ŝź 
This is not for consumer use. Only Authorized Bluesound Service personnel can access this USB port and  
SERVICE control button.

STANDBY : Press and hold the standby button for 5 seconds to place the unit in 0.5W Standby or Vacation Mode  
–źÇ”†źG£q܆½źÖ–££źª°Çź|†źÌÁ†‚ź°½ź†Ûdžª‚†‚źº†½–°‚Áź°źÇ–©†ŝź%ªźaq}qǖ°ªź6°‚†Řźq££źª†ÇÖ°½¡źq}ǖՖÇܼ֖££źq£Á°ź}†qÁ†ź 
and the Player will not appear in the App or respond to App commands. Press the Standby Button again to restore  
the Player to Ready Mode. Standby can also be used to restore the Player to Factory Settings or manually place  
the Player in Upgrade Mode if upgrading using a USB Memory Stick.

AC MAINS INPUT : The PULSE SOUNDBAR comes supplied with two separate AC power cords. Select the AC  
º°Ö†½ź}°½‚źqºº½°º½–qdžź°½źÜ°Ì½ź½†–°ªŝź†°½†ź}°ªª†}ǖªźÇ”†źº£ÌźÇ°źÇ”†źÖq££ź°ÌÇ£†ÇŘź}°ªª†}Çźç½©£ÜźÇ”†ź°Ç”†½ź 
end of the AC power cord to PULSE SOUNDBAR’s AC Mains input socket. Never force the plug into a wall outlet.  
ªźq‚qºÇ°½ź©qÜź|†źª†}†ÁÁq½Üź–ªź}†½Çq–ªź½†–°ªÁŝź£ÖqÜÁź‚–Á}°ªª†}Ǽǔ†źº£Ìź½°©źÇ”†źÖq££ź°ÌÇ£†Çźç½ÁÇŘź|†°½†ź 
disconnecting the cable from the PULSE SOUNDBAR’s AC Mains input socket.