MartinLogan Motion® Vision X Manual De Propietario

31

defeated. Some televisions will allow you to 
turn off the internal speaker via the television’s 
menu system. Other televisions may require you 
to turn the television’s volume to “zero” or to 
“mute” the television.

The soundbar is too quiet even when 
the soundbar is turned up
•  Check that the output on your television or 

other source components are not connected via 
a variable level output. Sometimes this option 
may be configured in your source components 
menu. Please refer the manual for the source 
component in question.

Soundbar won’t learn remote codes from 
aftermarket remote
•  Review the “Menu Option: Learn” section of 

this manual.

•  Hold the remote 12 inches (30 cm) from the 

soundbar during the learning process.

•  Press the appropriate button on the second 

remote four times.

•  There may be remote controls that the soundbar 

cannot learn or that the soundbar can not learn 
correctly. Due to the number of available remote 
controls, it is impossible to advise which will or 
will not work.

•  Check the user manual and/or manufacturer’s 

web-site for your aftermarket remote to see if 
MartinLogan is supported. If so, instead of 
‘learning’ with the soundbar, use the code 
provided by the manufacturer to program the 
aftermarket remote itself.

Soundbar remote won’t work
•  Replace the remote control’s batteries with 

matching batteries.

•  If new batteries do not fix the problem, you 

may have a faulty remote. Call MartinLogan 
customer service at 785-749-0133 for details. 

When using an aftermarket remote, the 
soundbar turns off when the television 
turns on
•  Turn the television on. Manually press the 

Power button on the soundbar so that both 
the soundbar and television are both on at the 
same time.

No sound coming from external sub
•  Check that the external sub is turned on.
•  Check that the soundbar is configured for a 

wired or wireless subwoofer connection. Refer 
to the “Subwoofer Connection” section of this 
manual.

•  If utilizing a wired connection, check that the 

subwoofer cables are attached to the Sub Out 
connection on the soundbar and to the appro-
priate input on the subwoofer.

•  If utilizing a wireless connection, attempt to 

re-sync the wireless connection. Refer to the 
“Subwoofer Connection” section of this manual.

•  If utilizing a wireless connection, move the sub-

woofer closer to the soundbar.

•  Turn the soundbar off and on using the remote 

control or the top panel power button.

•  Unplug the sound bar, wait 30 seconds, and 

plug it back in.

External sub is too quiet
•  Turn up the volume on the subwoofer.
•  Adjust the bass level setting in the soundbar 

menu system.

•  Try moving the subwoofer to a different loca-

tion in the listening room.

My soundbar is not behaving as expected.
•  Turn the soundbar off and on using the remote 

control or the top panel power button.

•  Unplug the sound bar, wait 30 seconds, and 

plug it back in.