Brandmotion FDMC-1270 Manual De Propietario
1270 Instructions 9-15-14.doc
Page 5 of 5
Step 18: Drill ½” hole on passenger side of
armrest bin 4 ½” down and route Power
Harness through.
armrest bin 4 ½” down and route Power
Harness through.
Step 19: Connect Power Harness to Charging
Module.
Module.
Step 21: Test system. LED light will
illuminate Blue once accessories are on.
Once Qi equipped device is placed on
Freedom Charge LED will illuminate Green
and charging begins. *Please note on some
devices syncing may take up to 15 seconds. Coil
locations vary on various devices; move device on
mat until LED illuminates green.
illuminate Blue once accessories are on.
Once Qi equipped device is placed on
Freedom Charge LED will illuminate Green
and charging begins. *Please note on some
devices syncing may take up to 15 seconds. Coil
locations vary on various devices; move device on
mat until LED illuminates green.
Step 22: Reassemble vehicle. Follow your
disassembly steps in reverse order, taking care not
to bind the harness wiring when reinstalling trim.
disassembly steps in reverse order, taking care not
to bind the harness wiring when reinstalling trim.
Step 23: Place removable consumer product
label on center of mat.
label on center of mat.