Sony DXS-M5511BT Marine Package Manual De Propietario

GB

Operate the BLUETOOTH device to 
connect to this unit.

 or 

 lights up.

Icons in the display:

Activate the BLUETOOTH function on the 
BLUETOOTH device.
Press SRC to select [BT PHONE] or [BT AUDIO].
Press ENTER to connect with the cellular phone, or 
PAUSE to connect with the audio device.

Note
While streaming BLUETOOTH audio, you cannot 
connect from this unit to the cellular phone. Connect 
from the cellular phone to this unit instead.

Tip
With BLUETOOTH signal on: when the ignition is turned 
to on, this unit reconnects automatically to the last-
connected cellular phone.

When an iPhone/iPod with iOS5 or later installed is 
connected to the USB port, the unit is paired and 
connected with the iPhone/iPod automatically.
To enable BLUETOOTH Auto Pairing, make sure 
[AUTOPAIR] in [BT] is set to [ON] (page 23).

Activate the BLUETOOTH function on the 
iPhone/iPod.

Connect an iPhone/iPod to the USB port.

Make sure that 

 lights up on the display of the 

unit.

 BLUETOOTH Auto Pairing is not possible if the unit is 

already connected to another BLUETOOTH device. In 
this case, disconnect the other device, then connect 
the iPhone/iPod again.

 If BLUETOOTH Auto Pairing is not established, see 

“Preparing a BLUETOOTH Device” for details (page 9).

Turn down the volume on the unit.

Connect the USB device to the unit.

To connect an iPod/iPhone, use the USB 
connection cable for iPod (not supplied).

Lights up when handsfree calling is 
available by enabling the HFP (Handsfree 
Profile).

Lights up when the audio device is 
playable by enabling the A2DP 
(Advanced Audio Distribution Profile).