Fujifilm X-E3 Prime Lens Kit Manual De Propietario
313
T
echnical Not
es
12
Product Care
To ensure continued enjoyment of the product,
observe the following precautions.
observe the following precautions.
Camera body: Use a soft, dry cloth to clean the camera
body after each use. Do not use alcohol, thinner, or
other volatile chemicals, which could discolor or de-
form the leather on the camera body. Any liquid on
the camera should be removed immediately with
a soft, dry cloth. Use a blower to remove dust from
the monitor, taking care to avoid scratches, and then
gently wipe with a soft, dry cloth. Any remaining
stains can be removed by wiping gently with a piece
of FUJIFILM lens-cleaning paper to which a small
amount of lens-cleaning fl uid has been applied. To
prevent dust entering the camera, replace the body
cap when no lens is in place.
body after each use. Do not use alcohol, thinner, or
other volatile chemicals, which could discolor or de-
form the leather on the camera body. Any liquid on
the camera should be removed immediately with
a soft, dry cloth. Use a blower to remove dust from
the monitor, taking care to avoid scratches, and then
gently wipe with a soft, dry cloth. Any remaining
stains can be removed by wiping gently with a piece
of FUJIFILM lens-cleaning paper to which a small
amount of lens-cleaning fl uid has been applied. To
prevent dust entering the camera, replace the body
cap when no lens is in place.
Image sensor: Multiple photographs marred by spots
or blotches in identical locations may indicate the
presence of dust on the image sensor. Clean the sen-
sor using
or blotches in identical locations may indicate the
presence of dust on the image sensor. Clean the sen-
sor using
D USER SETTING > SENSOR CLEANING.