Sony Alpha a7R II (no lens included) Manual De Propietario

 when using a light source that flickers, such as fluorescent lighting.

The minimum distance that you can come close to a subject does not change

 even if you select [Macro]. For the minimum in-focus range, refer to the

 minimum distance of the lens attached to the product.

To change the scene, rotate the front dial on the shooting screen and select a

 new scene.

[41] How to Use

Shooting

Selecting a shooting mode

Shutter Priority

You can express the movement of a moving subject in various ways by adjusting

 the shutter speed, for example, at the instant of the movement with high speed

 shutter, or as a trailing image with low speed shutter. The shutter speed can be

 changed while recording movies.

1.  Set the mode dial to S (Shutter Priority).

2.  Select the desired value by turning the front/rear dial.

3.  Adjust the focus and shoot the subject.

The aperture is automatically adjusted to obtain proper exposure.

If proper exposure cannot be obtained after setup, the aperture value on the

 shooting screen blinks. Although you can shoot as it is, resetting is

 recommended.

Use a tripod to prevent blurring when you use a slow shutter speed.

The SteadyShot warning indicator does not appear in shutter speed priority

 mode.

When the shutter speed is 1 second(s) or longer, noise reduction will be done

 after shooting for the same amount of time that the shutter was open.

 However, you cannot shoot any more while noise reduction is in progress.

The brightness of the image on the monitor may differ from the actual image

 being shot.