Canon PowerShot G7 X Mark II Manual De Propietario

101

Follow these steps before shooting to set your preferred shutter speed 

and aperture value to obtain the desired exposure.

For details on available shutter speeds and aperture values, see “Camera” 

 

z

Set the mode dial to [ ].

 

z

Turn the [ ] dial to set the shutter speed 

(1).

 

z

Turn the [ ] ring to set the aperture value 

(2).

 

z

When the ISO speed is fixed, an 

exposure level mark (4) based on 

your specified values is shown on the 

exposure level indicator for comparison 

to the standard exposure level (3). The 

exposure level mark is shown as [ ] or 

[ ] when the difference from standard 

exposure exceeds 3 stops.

 

z

The ISO speed is determined and screen 

brightness changes when you press 

the shutter button halfway after setting 

the ISO speed to [AUTO]. If standard 

exposure cannot be obtained with your 

specified shutter speed and aperture 

value, the ISO speed is displayed in 

orange.

(1) (2)

(3)

(4)

Set your preferred aperture value before shooting as follows. The camera 

automatically adjusts the shutter speed to suit your aperture value.

 

z

Set the mode dial to [

].

 

z

Turn the [ ] ring to set the aperture 

value.

 

●

Orange display of the shutter speed when you press the shutter 
button halfway indicates that the optimum exposure has not been 
obtained. Adjust the aperture value until the shutter speed is 
displayed in white, or use safety shift (see below).

 

●

[

]: Aperture value (size of the opening made by the 

diaphragm in the lens)

 

●

In [

] and [

] modes, press the [

] button and set 

[Safety Shift] on the [

camera automatically adjust the shutter speed and aperture value 
when there are exposure problems, so that you can shoot at the 
optimum exposure.  
However, safety shift is disabled when the flash fires.

 

●

You can customize camera operation so that turning the [ ] dial 
changes the aperture value (= 104).