Canon PowerShot G7 X Mark II Manual De Propietario

104

Reassign control ring functions as follows. Using the control ring is an 

enjoyable way to control the camera as you would a fully manual camera.

 

z

Press the [ ] button.

 

z

Choose an option, either by pressing the 

[ ] or [ ][ ] buttons or by turning the 

[ ] ring or [ ] dial.

 

z

Press the [ ] button to complete the 

setting.

 

z

Turn the [ ] ring or the [ ] dial to 

configure the assigned function.

 

●

You can also configure this setting by pressing the [

] button, 

touching an option to choose it, and then touching it again.

 

●

With the ISO speed in [AUTO] mode, you can also adjust the 
exposure before recording by turning the exposure compensation 
dial.

 

●

When the ISO speed is fixed, an exposure level mark based on 
your specified value is shown on the exposure level indicator for 
comparison to the standard exposure level. The exposure level 
mark is shown as [ ] or [ ] when the difference from standard 
exposure exceeds 3 stops.

 

●

You can check the ISO speed in [AUTO] mode by pressing the 
shutter button halfway. If standard exposure cannot be obtained 
with your specified shutter speed and aperture value, the ISO 
speed is displayed in orange.

 

●

Focus can be adjusted during recording by touching [ ] (to 
switch it to [

]) and then pressing the [ ][ ] buttons.