Canon PowerShot G7 X Mark II Manual De Propietario

41

 

●

To deactivate digital zoom, choose MENU (= 30) ► [

3] tab 

► [Digital Zoom] ► [Off].

Shoot at common focal lengths in a range of 24 – 100 mm (35mm film 

equivalent).

 

z

To change the focal length from 24 to 

28 mm, turn the [ ] ring counterclockwise 

until it clicks. Turn the [ ] ring 

counterclockwise to zoom in or clockwise 

to zoom out.

 

●

Step zoom is not available when recording movies even if you 
turn the [ ] ring.

 

●

When you are using digital zoom (= 41), you cannot adjust the 
zoom factor by turning the [ ] ring counterclockwise. However, 
you can set the focal length to 100 mm by turning it clockwise.

You can change how the control of the camera feels when you turn the 

control ring.

 

z

When you lower the selection lever, the 

clicking of the control ring will stop and 

you will be able to turn it smoothly.

When distant subjects are too far away to enlarge using the optical zoom, 

use digital zoom for up to about 17x enlargement.

 

z

Hold the lever until zooming stops.

 

z

Zooming stops at the largest zoom factor 

before the image becomes noticeably 

grainy, which is then indicated on the 

screen.

 

z

The camera zooms in even closer on the 

subject.

 

z

(1) is the current zoom factor.

 

●

Moving the zoom lever will display the zoom bar (which indicates 
the zoom position). The zoom bar is color-coded to indicate the 
zoom range.

 -

White range: optical zoom range where the image will not 
appear grainy.

 -

Yellow range: digital zoom range where the image is not 
noticeably grainy (ZoomPlus).

 -

Blue range: digital zoom range where the image will appear 
grainy.

 

●

Because the blue range will not be available at some recording 
pixel settings (= 97), the maximum zoom factor can be 
achieved by following step 1.

(1)