ClearView HD2-PTZ-4 Manual De Propietario
7
ADDR : 001-H
BR : 9600
PARITY : None
SOFTWARE VERSION : 2.210.2.0
PTZ VERSION : 3.00.05.RGCV
SELF-DIAGNOSIS OVER
BR : 9600
PARITY : None
SOFTWARE VERSION : 2.210.2.0
PTZ VERSION : 3.00.05.RGCV
SELF-DIAGNOSIS OVER
SYSTEM SETTING
DISPLAY SETTING
CAMERA SETTING
FUNCTION SETTING
EXIT
DISPLAY SETTING
CAMERA SETTING
FUNCTION SETTING
EXIT
Figure 3-1
Self-diagnosis
After installation, please connect speed dome to power. The system goes on a self-diagnosis, and then
it pops up the above interface to show the system information.
The above interface disappears after speed dome received the first command (or the display time lasts
for 20 seconds).
ADDR: Here you can view dome address information. For example, 0-H, 0 means address number,
-H is the hardware address mode, -S is software address mode.
BR: It is to display the communication baud rate of the speed dome.
PARITY: It is to display the communication parity bit format.
VERSION: The speed dome software version.
PTZ VERSION: Current PTZ version.
PARITY: It is to display the communication parity bit format.
VERSION: The speed dome software version.
PTZ VERSION: Current PTZ version.
Note:
When you are using the control keyboard or the matrix host to control the device, please make
sure the control parameter of the keyboard or the matrix host is the same with the speed dome
OSD (including address, baud rate, parity). Please make sure the cable connection is OK.
3.3 Main Menu
You can open speed dome menu via control keyboard, matrix, or speed dome control terminal.
Figure 3-2 Main menu
SYSTEM SETTING:Dome initialization information, address information, set north direction,
language, video output, factory default setup, system restart and so on.
DISPLAY SETTING: Display dome preset title, azimuth display, direction, zoom and dome internal
temperature and etc.
CAMERA SETTING:Display dome white balance setup, exposure setup, day/night setup, focus
setup, image adjustment, zoom speed, aperture setup, aperture restrain level, digital zoom, image
flip, image output mode, factory default setup, camera restart and etc.
FUNCTION SETTING: Set preset, auto scan, auto tour, auto pattern, idle motion, PTZ speed,
power up, menu password, menu idle time and etc.
EXIT: Log out the system menu.
3.4 Menu Operation