Canon Speedlite 430EX III-RT Manual De Propietario
87
>: Setting Personal Functions
P.Fn-05:
]
(AF-assist beam emission method)
You can select AF-assist beam emission method.
0:
J
(Small series of flashes fired by flash)
AF-assist beam, which uses a small series of flashes, is emitted
(p.22).
(p.22).
1:
K
(Infrared)
Infrared AF-assist beam aiming at the center AF point is emitted.
Position the subject in the center of the viewfinder and focus. The
effective range is approx. 0.7 - 8 m/2.3 - 26.2 ft.
Position the subject in the center of the viewfinder and focus. The
effective range is approx. 0.7 - 8 m/2.3 - 26.2 ft.
P.Fn-06:
+
(Quick flash)
You can set whether or not to fire the flash when the flash-ready lamp is lit
in green (before the flash is fully charged) to shorten the charge waiting
time. Quick flash also functions during continuous shooting.
in green (before the flash is fully charged) to shorten the charge waiting
time. Quick flash also functions during continuous shooting.
0: ON
(Enabled)
1: OFF
(Disabled)
When 1 is set, manually select the center AF point. When an AF point
other than the center AF point is selected, focusing with the AF-assist
beam is not possible (AF-assist beam is not emitted).
other than the center AF point is selected, focusing with the AF-assist
beam is not possible (AF-assist beam is not emitted).
When the color filter is attached (p.37), the AF-assist beam, which uses
a series of small flashes, is not emitted. If AF-assist beam is required, set
the value to 1.
a series of small flashes, is not emitted. If AF-assist beam is required, set
the value to 1.
When Quick flash is fired during continuous shooting, underexposure may
occur since the flash output decreases.
occur since the flash output decreases.