Exakta DC-2100 Guía Del Usuario
- 43 -
E
Macro (Close-up) Photography
The macro photography mode is used when the distance to the subject is between 8 cm and infinity at wide angle.
In the macro photography mode, the LCD monitor automatically turns ON. Take the photograph while viewing the
LCD monitor.
In the macro photography mode, the LCD monitor automatically turns ON. Take the photograph while viewing the
LCD monitor.
1. Set the mode dial to
or
.
2. Press the
button to set to the macro mode.
is displayed on the LCD and the arrow points to the Macro icon.
In the Manual Photography mode, is not displayed on the LCD
monitor when the manual setup screen is displayed.
Press the ENTER button to set the manual setup screen to
not display.
monitor when the manual setup screen is displayed.
Press the ENTER button to set the manual setup screen to
not display.
Pressing the
button displays the available Self-timer and Macro modes in order.
Self-timer
➔
Macro
➔
Self-timer & Macro
➔
Off
3. Look at the image on the LCD monitor to compose the picture.
4. Press the shutter button down halfway, then press it the rest of the way down.
5. To cancel macro photography, press the
button until it turns off.
Note
• Macro photography is not canceled even if the camera is turned off or the Auto Power OFF function is
activated.
• Only the
Suppressed Flash and Forced Flash modes can be set for flash photography.
• The settings are canceled when you remove or insert the batteries or disconnect or connect the AC
adapter.