Vivitar ViviCam 3720 Guía Del Usuario
![Vivitar](https://files.manualsbrain.com/attachments/4034af14170e7d3c8a31eee3d8043b1095e4a66a/common/fit/150/50/f434ba12af532a0590ef2885f6c5bf27e24e71a96277e9850b74380aeffe/brand_logo.png)
6-1 Camera will not turn on
1. Battery is not properly installed- remove and reinstall the batteries.
2. Insufficient battery voltage- Do not use old batteries or batteries
with mixed battery life. It is not recommended to use rechargeable
batteries with lower voltage.
1. Battery is not properly installed- remove and reinstall the batteries.
2. Insufficient battery voltage- Do not use old batteries or batteries
with mixed battery life. It is not recommended to use rechargeable
batteries with lower voltage.
6-2 Flash will not fire
1. Flash set to OFF -Set the flash to Auto or On.
2. Flash has not been fully charged The flash takes a few seconds
to charge up while the Operation LED is blinking. Flash light is
fully charged when the Operation LED turns off.
3. Battery level is low - When the battery indicator does not show a
fully charged battery, the voltage is low for the flash to work.,
Please change new batteries.
1. Flash set to OFF -Set the flash to Auto or On.
2. Flash has not been fully charged The flash takes a few seconds
to charge up while the Operation LED is blinking. Flash light is
fully charged when the Operation LED turns off.
3. Battery level is low - When the battery indicator does not show a
fully charged battery, the voltage is low for the flash to work.,
Please change new batteries.
6-3 Image is blurred / out of focus
1. Subject is out of focal range. Ensure that there is at least 1.5m
( 5ft ) between the camera lens and subject.
2. Camera moved- Hold the camera steady while taking the picture.
When flash is on, hold the camera steady until flashes have
fired two times( First flash is to reduce a red-eye phenomenon
and to detect the brightness of the target.)
1. Subject is out of focal range. Ensure that there is at least 1.5m
( 5ft ) between the camera lens and subject.
2. Camera moved- Hold the camera steady while taking the picture.
When flash is on, hold the camera steady until flashes have
fired two times( First flash is to reduce a red-eye phenomenon
and to detect the brightness of the target.)
Chapter 6 : Common Problems: