Genius G-Shot P850 32300080101 Manual De Usuario
Los códigos de productos
32300080101
English
-43-
Troubleshooting
Problem
Cause
Solution
Battery is inserted in the
wrong direction.
wrong direction.
Reload battery in the correct direction.
Batteries are dead.
Replace or recharge batteries.
Power does not
turn on.
turn on.
The battery compartment
door is open.
door is open.
Make sure the battery compartment door is
securely closed.
securely closed.
The flash is charging.
Wait for the flash to charge.
Memory is full.
Insert a new memory card.
The camera does
not take pictures.
not take pictures.
Memory card is not
formatted correctly.
formatted correctly.
The card may be defective, use a new
card.
card.
The Flash is charging.
Wait for the flash to charge.
Image is not
recorded when
the shutter button
is pressed.
recorded when
the shutter button
is pressed.
Memory is full.
Insert a new memory card.
The flash does
not fire.
not fire.
Flash is set to OFF.
Set the flash to any mode except off.
The camera was
moving when the image
was captured.
moving when the image
was captured.
Hold the camera steady when shooting
picture.
picture.
Image is blurry or
out of focus.
out of focus.
The subject was beyond
the range within which
the camera can focus.
the range within which
the camera can focus.
Turn the Macro mode on it the subject is
within 15 cm or 40 cm.
Do not use Macro mode when shooting
distant subjects.
within 15 cm or 40 cm.
Do not use Macro mode when shooting
distant subjects.
Image is not
displayed on the
LCD monitor.
displayed on the
LCD monitor.
A memory card with
non-DCIF images
(recorded with other
camera) is loaded.
non-DCIF images
(recorded with other
camera) is loaded.
This camera cannot display non-DCIF
images.
images.
Recorded images
are not saved in
memory.
are not saved in
memory.
The camera was turned
off / powered down
before the image was
stored in memory.
off / powered down
before the image was
stored in memory.
If the battery low indicator appears on
the LCD monitor, replace the battery
immediately.
the LCD monitor, replace the battery
immediately.
Cannot transfer
images to a
computer after
connecting the
USB cable.
images to a
computer after
connecting the
USB cable.
USB driver is not
installed.
installed.
Install the USB driver before you
connect the camera to a computer / turn
the camera on.
connect the camera to a computer / turn
the camera on.
Card error
The memory card
format may not be
correct.
format may not be
correct.
Re-format the memory card to the FAT
format using a card reader in Windows.
format using a card reader in Windows.