Exegin Technologies Limited Q52 Manual De Usuario
39
Q52 Installation and Configuration Guide © Exegin Technologies Limited, 2007
7. Using HTML Pages to Configure the Q52
Accessing the Q52 HTML Pages
Accessing the Q52 HTML Pages
2. Ensure that your network station can successfully "
ping
" the Q52 over the
network.
3. Direct your Web browser to the Uniform Resource Locator (URL):
http://Q52IPaddress
For example:
http://192.168.11.9
4. When prompted for a User ID and Password, type in "
root
" for the ID and press
ENTER at the password prompt.
By default, no password is set. However, if a password has been configured, then
type it in and then press ENTER.
type it in and then press ENTER.
Each page can be accessed directly by directing your browser to the URL:
http://Q52IPaddress/filename.html
where "
filename
" is one of:
zigbeeConf
Zigbee Settings form
zigbeeStatus
Zigbee Status form
bridgeConf
Bridge Settings form
bridgeStatus
Bridge Status form
tcpipConf
TCP/IP (network) Settings form
tcpipStatus
TCP/IP (network) Status form
adminConf
Administration form
pswdConf
System Password form
sntpConf
SNTP Settings form
upgrade
Firmware Upgrade form
reboot
System Restart page
help
Help page.
Password Protection
Some of the Q52 configuration forms are password-protected. When first accessing these
forms, a password dialog will be displayed as shown in
forms, a password dialog will be displayed as shown in
.