Generac Power Systems 0G6019 Manual De Usuario
6
ALARM AND STATUS DISPLAY
The display will normally show the operating status
of the generator or an alarm message if one is pres-
ent. See Figures 6 and 7.
of the generator or an alarm message if one is pres-
ent. See Figures 6 and 7.
Figure 6 — Sample Alarm Screen
WARNING
LOW
BATTERY
ALARM
Figure 7 — Sample Status Screen
T
+
RUNNING
AND
COOLING
DOWN
When a key is pressed, the display switches into
menu mode which will allow access to the special
functions of the unit. If no keys are pressed for 30
seconds, the unit will revert back to the status or
alarm display.
menu mode which will allow access to the special
functions of the unit. If no keys are pressed for 30
seconds, the unit will revert back to the status or
alarm display.
When an alarm occurs, the display will show a flash-
ing alarm icon and the alarm message. The backlight
will also flash if not in battery mode. If the alarm
goes away, the display will revert to the status display.
If two or more alarms exist, the most recent one to
occur will be displayed. If a key is pressed to go into
menu mode, when returning to the alarm display, the
latest alarm will be displayed.
ing alarm icon and the alarm message. The backlight
will also flash if not in battery mode. If the alarm
goes away, the display will revert to the status display.
If two or more alarms exist, the most recent one to
occur will be displayed. If a key is pressed to go into
menu mode, when returning to the alarm display, the
latest alarm will be displayed.
THE MENU SYSTEM
Pressing any key will switch the display into menu
mode (Figure 8). If no further keys are pressed for
one minute, the unit will revert back to the status
display. Menu Mode is indicated by a menu name on
the right side of the display, and an icon (picture) on
the left side. Use the up/down arrow keys to move to
the menu required, then press the enter key to see
the choices.
mode (Figure 8). If no further keys are pressed for
one minute, the unit will revert back to the status
display. Menu Mode is indicated by a menu name on
the right side of the display, and an icon (picture) on
the left side. Use the up/down arrow keys to move to
the menu required, then press the enter key to see
the choices.
Figure 8 — Menu System
T
+
STATUS DISPLAY
TEST MENU
L
O
G
HISTORY MENU
E
MAIL
A
LARMS
EMAIL MENU
SETTINGS MENU
EXERCISE MENU
RADIO MENU
Time
TIME &
DATE MENU
DATE MENU
t
GRAPH MENU
Once a menu is selected, there will be a list of choic-
es. The current choice is shown by a rectangle drawn
around it (Figure 9). Use the arrow keys to navigate
the rectangle to the topic required, then press the
enter key.
es. The current choice is shown by a rectangle drawn
around it (Figure 9). Use the arrow keys to navigate
the rectangle to the topic required, then press the
enter key.
Figure 9 — Menu Choices
Choice 1
Choice 3
Choice 2
Use Arrow
Keys to Move
the Selector
Keys to Move
the Selector
STATUS MENU
T
+
The status menu item simply provides a way to
show the current status message coming from
the generator. This is shown as a text message
show the current status message coming from
the generator. This is shown as a text message
on the LEFT hand side of the display. Normally this
will show the following message: “READY TO RUN”.
will show the following message: “READY TO RUN”.
TEST MENU
The test menu permits starting and stopping
the generator. Use the arrow keys to navigate
to the appropriate option. If choosing to start
the generator. Use the arrow keys to navigate
to the appropriate option. If choosing to start
the generator, the two arrow keys will need to be
pressed together to confirm the command. To cancel
the command, press the enter key.
pressed together to confirm the command. To cancel
the command, press the enter key.
Wireless Display System