General Infinity Ltd BXR-100 Manual De Usuario
mobile phone or other Bluetooth device to start Bluetooth
function. Find the headset “BXR-100”, press the pairing
code “0000” The blue LED is start flashing, the audio receiver
is in connected mode
Working in AV mode
Working in headset mode
• Short press MFB key to toggle play/pause action
• Short press Vol+ or Vol- to adjust volume one step
• Hold Vol+ continue will do volume up repeat action in
connection mode
• Hold Vol- continue will do volume down repeat action in
connection mode
• Short press Forward or Backward button to select songs
Standby mode:
• Double click MFB key to init voice dial function
• Long press MFB key to init last number redial function
Incoming call (ring) mode:
• Short press MFB key to accept phone call
• Long press MFB key to reject incoming call
In call active mode:
• Short press Vol+ or Vol- to adjust volume
• Long press MFB key when hear a beep tone to toggle call
between headset and cellular phone
• Short press MFB key to end call
• Long press Forward and Backward to toggle microphone
mute
Note: long press is 1.8 second.
very long press is 4.8 second
5
6
Trouble shooting
Led statuses
If the audio receiver does not work, try the following:
- Ensure connecting devices are charged not in low battery
state
- Turn off all devices and then turn them on in order to shown
in this guide
- Ensure devices are within 10 meter range
- Ensure the audio receiver is connected by check the blue
LED flash
- Press vol+ and backward buttons at same time for very long
press (about 5 seconds) will clear the paired information.
Note 1: Some A2DP source like 3.5mm interface transmitter
can not support AVRCP profile, so it can not do remote
control function.
POWER ON
POWER OFF
PAIRING
STANDBY MODE
AV ACTIVE MODE
HEADSET ACTIVE MODE
LOW BATTERY INDICATION
AUTO SHUTDOWN
POWER OFF
PAIRING
STANDBY MODE
AV ACTIVE MODE
HEADSET ACTIVE MODE
LOW BATTERY INDICATION
AUTO SHUTDOWN
7
8