Binatone MBP160PU Manual De Usuario
16
Using Your Digital Audio Baby Monitor
3.4.4
Reset diaper change timer
1.
Press
on the parent unit.
The timer will display on the screen.
2.
Press
to reset the timer to
00-00
, then press
-
or
+
to adjust the timer.
Each key press represents an interval of 30 minutes, up to an interval of 24
hours.
hours.
3.
Press
or
to save and start the adjusted timer.
The screen will display
SAVED
before returning to idle screen.
The
diaper change timer button remains lighted when the timer is
running.
NOTE
If no key is pressed within 10 seconds after adjusting the timer in step 2, the
adjusted timer will be stored automatically, but the timer will not start.
To start the timer, press
If no key is pressed within 10 seconds after adjusting the timer in step 2, the
adjusted timer will be stored automatically, but the timer will not start.
To start the timer, press
and then press
or
.
When the time limit is reached, the
diaper change timer button will flash
and the parent unit will emit an alarm for 30 seconds. Press any key on the
parent unit to stop the alarm and reset the timer to
parent unit to stop the alarm and reset the timer to
00-00
.
3.4.5
Set sleep timer
1.
Press
on the parent unit.
2.
Press
-
or
+
to adjust the timer.
Each key press represents an interval of 30 minutes, up to an interval of 24
hours.
If the next napping time is 2 hours later, press
hours.
If the next napping time is 2 hours later, press
-
or
+
to adjust the timer
until
02-00
is displayed.
3.
Press
or
to save and start the timer.
The screen will display
SAVED
before returning to idle screen.
The
sleep timer button remains lighted when the timer is running.
3.4.6
Reset sleep timer
1.
Press
on the parent unit.
The timer will display on the screen.